SPECIFICATIONS
112
44.5
G½
OPERATING CONDITIONS
1.
Water sup ply pre ssure : 0.05 ~ 0.7 5 MPa.
2.
Ensure that water su pply is cle an
( No Sa nd, Dirt, Etc.).
MAINTENANCE
All Finishes : Clean the finish with mild soap
and
warm water. Wipe entire
completely dry with clean soft cloth. Many
cleaners may contain chemicals, such as
ammonia, chlorine, toilet cleaner etc. which
could adversely affect the finish and are not
recommended for cleaning
S06089Z
SPECIFICATIONS
112
44.5
G½
OPERATING CONDITIONS
1.
Water sup ply pre ssure : 0.05 ~ 0.7 5 MPa.
2.
Ensure that water su pply is cle an
( No Sa nd, Dirt, Etc.).
MAINTENANCE
All Finishes : Clean the finish with mild soap
and
warm water. Wipe entire
completely dry with clean soft cloth. Many
cleaners may contain chemicals, such as
ammonia, chlorine, toilet cleaner etc. which
could adversely affect the finish and are not
recommended for cleaning
S06089Z
LAVATORY FAUCET (COLD ONLY)
MAINTENANCE
Don t use abrasive cleaners or solvents on
1.
faucets and fittings.
2.
As the product model is constantly
updated, the actual product may not look
the same as it shown in the diagram, but
the basic installation principles are the
same.
INSTALLATION
Packing
surface
LAVATORY FAUCET (COLD ONLY)
MAINTENANCE
Don t use abrasive cleaners or solvents on
1.
faucets and fittings.
2.
As the product model is constantly
updated, the actual product may not look
the same as it shown in the diagram, but
the basic installation principles are the
same.
INSTALLATION
Packing
surface
"DONNA" SINGLE LEVER
TROUBLESHOOTING
PROBLEM
Flow rate unsatisfactory
Wat er leaks around t he body
Handle is loose
Faucet
2. CONNECTING NUT
Ø25 Hole
Washer
Nut
"DONNA" SINGLE LEVER
TROUBLESHOOTING
PROBLEM
Flow rate unsatisfactory
Wat er leaks around t he body
Handle is loose
Faucet
2. CONNECTING NUT
Ø25 Hole
Washer
Nut
TX109LD
CHECK
SOLUTION
POINT
1
Remove and Clean
Tig hten
2
Tig hten
3
3. BOLT
1. AERATOR
TX109LD
CHECK
SOLUTION
POINT
1
Remove and Clean
2
Tig hten
3
Tig hten
3. BOLT
1. AERATOR
R11
R11
Need help?
Do you have a question about the DONNA TX109LD and is the answer not in the manual?
Questions and answers