Safety Instructions; Use - EcoFlow Wave 2 User Manual

Safety Instructions

Use

1. Do not use this product near a heat source (such as fire or heater), and avoid direct
exposure to sunlight. Doing so may cause flammable liquids to leak or explode.
2. If the product catches fire by accident, we recommend that you use fire extinguishers
in the following order: water or water mist, sand, fire blanket, dry powder, and carbon
dioxide.
3. Keep the product away from any liquid. Do not get the product wet, and try to avoid
working in a wet location.
4. If the product is wet inside, immediately turn the power off and remove the power cord,
and place them in a safe open area. Stay away from the product until it is dry. Please take
measures to prevent electric shock when touching it. Do not operate or discard the dry
product without authorization. Please contact the customer service to dispose of it properly.
5. If there is dirt in any outlets, clean it with a dry cloth.
6. Do not use this product in environments with strong static electricity or magnetic fields
(such as a thunderstorm).
7. Do not touch product outlets with wires or other metal objects, otherwise the product may
short circuit.
8. Do not put your fingers into the air inlet/outlet.
9. Do not disassemble the product or extend any power cord without authorization since this
may result in electric shock or even fire.
10. If the product components or power cords are damaged, they must be repaired and replaced
by the manufacturer, dealer or qualified electrical engineer to avoid hazardous conditions.
11. Do not place the battery where the air pressure is extremely low. As this may cause
flammable liquids to leak or explode.
12. Do not stand or sit on the product.
13. Do not pile heavy objects on the product.
14. Do not obstruct the air inlet/outlet or exhaust pipe during operation.
15. During the operation or transportation of the product, please avoid external damages, like
drops or impact to prevent any damages to the internal compressor. If the product is tilted
or impacted by a strong external force, immediately turn the power off and remove the
power cord. Leave it to stand for at least 6 hours before using.
16. Please store the product where it is dry and ventilated, and ensure that the distance
between the air inlet/outlet and the wall is >0.5 m.
17. Do not use unofficial components or accessories since they will void your warranty. If
they need to be replaced, please purchase them through the official EcoFlow distribution
channels.
18. Please keep the product out of the reach of pets. Children should not operate this product
without supervision.
19. Electromagnetic fields created by this product may affect the normal functioning of
medical implants or personal medical devices, such as pacemakers, cochlear implants,
2