EcoFlow Wave 2 Add-on Battery - Portable Air Conditioner Manual
![]()
What's in the Box
![]()
Product Details
![EcoFlow - Wave 2 Add-on Battery - Product Details Product Details]()
- Add-on battery socket
- Unlock button
- USB-C output port
- USB-A output port
- Indicator lights
- Power button
Power On/Off
After the battery is connected to Wave 2, turn on Wave 2 to power the battery at the same time. If used separately, long press the main power button to power on/off the product. During first use, long press the power button for 3 seconds to activate the product. When the battery is charging other devices, it can't be turned off by long pressing the main power button unless the charging cable is unplugged first.
![EcoFlow - Wave 2 Add-on Battery - Power On/Off Power On/Off]()
Charging Your Devices
Charging Wave 2
Installation
- Align the connecting positions
![EcoFlow - Wave 2 Add-on Battery - Charging Your Devices - Installation - Step 1 Charging Your Devices - Installation - Step 1]()
- Slide forward
![EcoFlow - Wave 2 Add-on Battery - Charging Your Devices - Installation - Step 2 Charging Your Devices - Installation - Step 2]()
- Connect the plug and turn the power on
![EcoFlow - Wave 2 Add-on Battery - Charging Your Devices - Installation - Step 3 Charging Your Devices - Installation - Step 3]()
Disassembly
- Power off and remove the plug
![EcoFlow - Wave 2 Add-on Battery - Charging Your Devices - Disassembly - Step 1 Charging Your Devices - Disassembly - Step 1]()
- Press and hold the unlock button, and slide it backward
![EcoFlow - Wave 2 Add-on Battery - Charging Your Devices - Disassembly - Step 2 Charging Your Devices - Disassembly - Step 2]()
- Remove Wave 2
![EcoFlow - Wave 2 Add-on Battery - Charging Your Devices - Disassembly - Step 3 Charging Your Devices - Disassembly - Step 3]()
![]()
- If Wave 2 and the battery are to be moved, ensure that they are secured in position, and handle them as smoothly as possible to prevent them from falling.
- Do not directly remove the cable to avoid damaging the battery cell.
Charging Other Devices
After the battery is started, the device can be charged through the USB port.
![EcoFlow - Wave 2 Add-on Battery - Charging Other Devices Charging Other Devices]()
Charging the Add-on Battery
The add-on battery can be charged from AC outlets, portable power stations, car charging outlets, and solar panels. Except for when charging with a portable power station, other charging methods can only be used after the add-on battery is connected to Wave 2 to avoid product damage caused by a voltage mismatch. Refer to the Wave 2 User Manual for more requirements.
AC Charging (Household Outlet)
![EcoFlow - Wave 2 Add-on Battery - AC Charging (Household Outlet) AC Charging (Household Outlet)]()
Solar Charging
![EcoFlow - Wave 2 Add-on Battery - Solar Charging Solar Charging]()
![]()
Turn off Wave 2 when charging the add-on battery for improved charging efficiency.
Car Charging
![EcoFlow - Wave 2 Add-on Battery - Car Charging Car Charging]()
Battery Pack Charging
![EcoFlow - Wave 2 Add-on Battery - Battery Pack Charging Battery Pack Charging]()
Indicator Light and Troubleshooting
![]() | Off | ![]() | Solid white | ![]() | Flashing white | ![]() | Flashing orange |
Type | Indicator status | Indications |
Power-on | ![]() | LEDs 1-4 turn on in order |
Power-off | ![]() | LEDs 4-1 turn off in order |
Discharging level | ![]() | ≤5% |
![]() | ≤25% |
![]() | ≤50% |
![]() | ≤75% |
![]() | ≤100% |
Charging level | ![]() | ≤25% |
![]() | 75% - 99% |
![]() | 100% |
Firmware update | ![]() | LEDs 2-3 flash alternately |
USB fault | ![]() | Contact customer service for help. |
The temperature is too high | ![]() | Restart after the unit temperature drops. |
The temperature is too low | ![]() | Restart after the unit temperature rises. |
Permanent fault | ![]() | Contact customer service for help. |
Care and Maintenance
- Use or store this product within an ambient temperature range of 20°C-45°C (68°F-113°F), and keep away from water sources, heat sources, and metal objects.
- For long-term storage, please recharge the product every three months (discharge it to 0% first, and then charge it to 30-50% for long-term storage). If the battery has been idle for a long time with low power, it will cause irreversible damage to the battery cells. The product will not be covered by the warranty if it is not charged or discharged for more than 6 months.
- For safety, please do not store the product in ambient temperatures higher than 45°C (68°F) or lower than -10°C (14°F) for a long time.
- If the product has been idle for too long and the power level is 0%, it will enter a deep sleep protection mode. Charge the product before using it again.
Specifications
Input/Output Specifications |
Model | EFKT210-EB |
Capacity | 1159 Wh (50.4 V 23 Ah) |
USB-A Output | 5/9/12 V 2.4/2/1.5 A, 18 W max |
USB-C Output | 5/9/12/15/20 V 5 A, 100 W max |
XT150 Input Power | 857 W max |
XT150 Output Power | 712 W max |
Battery Life | 2-8 hours |
Battery Specifications |
Battery Cell Material | NCM ternary lithium battery |
Cycle Life | 80%+ capacity after 800 cycles |
IP Rating | IP65 |
Operating Temperature |
Optimal Operating Temperature | 20°C—45°C (68°F to 113°F) |
Discharging Temperature | -20°C—50°C (-4°F to 122°F) |
Charge Temperature | 0°C—45°C (32°F to 113°F) |
Storage Temperature | Ordinary temperature optimal: 20°C—30°C (68°F—86°F) |
General Information |
Net Weight | Approximately 7.8 kg (17.2 lbs) |
Dimensions (L × W × H) | 515×272×92 mm (20.3×10.7×3.6 inch) |
Safety Instructions
Use
- Do not use the product near a heat source, such as fire or a heater, and avoid direct exposure to sunlight.
- Strictly comply with the recommended ambient temperature set in this user manual when using this product. If the temperature is too high, the battery may catch fire or explode. If the temperature is too low, the product may not work normally.
- If the product catches fire, we recommend that you use fire extinguishers in the following order: water or water mist, sand, fire blanket, dry powder, and carbon dioxide.
- If the product is wet inside or it falls into water by accident, immediately stop using the product, turn off the power supply, and place it in a safe open area. Stay away from the product until it is dry. Please take measures to prevent electric shock when touching it. Do not operate or discard the dry product without authorization. Please contact customer service to dispose of it properly.
- If there is dirt in or on any outlets, clean it with a dry cloth.
- Do not use this product in environments with strong static electricity or magnetic fields (such as thunderstorm).
- Do not place the product where the air pressure is extremely low, as this may cause flammable liquids to leak or explode.
- Do not pile heavy objects on the product.
- Please store the product in a dry and ventilated space.
- Please keep the product out of the reach of children and pets.
- For long-term storage, please discharge and then charge the product every three months (discharge it to 0% first, and then charge it to 30%-50% for long-term storage). The product will not be covered by the warranty if it is not charged or discharged for more than 6 months.
- Electromagnetic fields created by this product may affect the normal functioning of medical implants or personal medical devices, such as pacemakers, cochlear implants, hearing aids, defibrillators and so on. If you are using these medical devices, please consult the manufacturers about the restrictions on the use of relevant devices to ensure that a safe distance is maintained between this product and the implanted medical devices (such as pacemakers, cochlear implants, hearing aids, defibrillators and so on) during operation.
- Do not disassemble the product in any way or pierce it with sharp objects.
- Do not touch product outlets with wires or other metal objects. Please do not wear any metal jewelry when plugging/unplugging the power cord to avoid a short circuit.
- During the operation or transportation of the product, please avoid external damage, like drops or impact. In case of a strong external impact, immediately stop using the product and turn off the power supply.
- If the battery has severe swelling, please stop using it, and properly dispose of it according to the method in Article 2 of [Disposal].
- If the case of the product falls off, the inside is exposed or other conditions arise, please stop using it. Contact the manufacturer, dealer or qualified electrical engineer for repair and replacement.
- Do not use unofficial wiring or accessories since they will void your warranty. If they need to be replaced, please purchase them through the official EcoFlow distribution channels.
![]()
Documents / ResourcesDownload manual
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Download EcoFlow Wave 2 Add-on Battery - Portable Air Conditioner Manual
Need help?
Do you have a question about the Wave 2 Add-on Battery and is the answer not in the manual?
Questions and answers