Control Buttons - EcoFlow Wave 2 User Manual

Control Buttons

Function
selection
Power button
Power-on/Screen-off. If there is no operation within 5 minutes, the LCD and ambient
Press
light will be off automatically. Press any button to wake them up.
Press and hold it for 3 seconds for power-off.
Press and hold
Function selection
Switch cooling
Press
there will be down time lasting appropriately 2 minutes for protection.
Press and hold it for × seconds to reset Wi-Fi
Press and hold
If reconnection is required, please open the EcoFlow app to complete
operations.
Mode selection button (available for cooling/heating only)
Switch max
Press
be set at max mode, and Wave 2 will work at maximum power.
Press and hold it for 1 second to switch real-time ambient temperature
Press and hold
real-time air outlet temperature
Temperature+/Temperature- button
Setting of temperature and cooling/heating temperature range: 16°C-30°C. The fan
Press
function does not support temperature setting.
Switch the temperature units by pressing and holding the Temperature+
Press and hold
and Temperature- buttons simultaneously for 1 second
Fan speed control button
Fan speed setting (Low
Press
position).
Press and hold Turn on the external circulation drainage of the water tank
* Please read the section of [How to Drain] when using the external circulation drainage
function.
Mode
Temperature- Temperature+ Fan speed control
selection
/heating /fan
/sleep /eco /custom mode. The temperature or fan speed can not
functions. In case of cooling/heating switching,
.
/medium
Power
button
and Bluetooth .
.
/high triple
*.
/
7