Operation
1
Attaching the crank
Attach the crank (F) to the handle as shown below.
Attach the crank (F) by aligning the tap with the hole on the crank (F) until it snaps into place.
To detach the crank, the wrench (EE) is required to press the tap to take the crank (F) out.
Attach the crank (F) without using the tap.
To detach the crank (F), just take the crank out.
NOTE: Both methods of attaching the crank (F)
are acceptable.
01:
02:
1
F
2
2
1
EE
1
F
2
18