1. Manuals
  2. Brands
  3. TruVision Manuals
  4. Digital Camera
  5. S Series
  6. Installation manual

TruVision S Series Installation Manual

Anpr camera
Hide thumbs Also See for S Series:
Table of Contents

Advertisement

Quick Links

Download this manual
TruVision S Series ANPR
Camera Installation Guide
P/N 1091A-EN • REV B • ISS 12JUL22

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the S Series and is the answer not in the manual?

Questions and answers

Related Manuals for TruVision S Series

Summary of Contents for TruVision S Series

  • Page 1 TruVision S Series ANPR Camera Installation Guide P/N 1091A-EN • REV B • ISS 12JUL22...
  • Page 2 © 2022 Carrier. All rights reserved. Specifications subject to change without prior notice. Trademarks and patents TruVision names and logos are a product brand of Aritech, a part of Carrier. Other trade names used in this document may be trademarks or registered trademarks of the manufacturers or vendors of the respective products.

  • Page 3: Table Of Contents

    Setting up the camera 6 IR illumination 7 Accessing the SD card 7 Mounting the camera 8 Using the camera with a TruVision recorder or another system 14 Using the camera with TruVision Navigator 14 Installation recommendations 14 Specifications 18...

  • Page 4: Introduction

    Introduction Product overview This is the installation guide for S Series ANPR camera models: TVLP-S01-0401-BUL-G TruVision ANPR camera, 4MP, 2.8 to 12 mm, 50 m IR, Wiegand, IP67, IK10, POE+ (802.3-at) / 12VDC TVLP-S01-0402-BUL-G TruVision ANPR camera, 4MP, 8 to 32 mm, 100 m IR, Wiegand, IP67, IK10, POE+ (802.3-at) / 12VDC...

  • Page 5: Package Contents

    • Cleaning: Do not touch the sensor modules with fingers. If cleaning is necessary, use a clean cloth with some ethanol and wipe the camera gently. If the camera will not be used for an extended period, put on the lens cap to protect the sensors from dirt. Package contents Check the package and contents for visible damage.

  • Page 6: Camera Description

    Camera description Figure 1: S Series ANPR camera BNC port RS-485 port Serial port for debugging Power input (12 VDC) SD card 12 VDC output Reset button 10. Alarm 1 In/Out Audio In 11. Alarm 2 In/Out Audio Out 12. Ethernet RJ45 PoE port 13.

  • Page 7: Ir Illumination

    You can configure the IR illuminators using a web browser or a client software, such as TruVision Navigator. If the function is enabled, the IR light is On when the camera enters night (black and white) mode. If disabled, the IR light is always Off.

  • Page 8: Mounting The Camera

    Mounting the camera Mount the camera on a ceiling or wall. 1-A. 1-A1. 1-A2. 1-A3. Installation Guide...
  • Page 9 1-A4. 1-A5. 1-B. 1-B1. Installation Guide...
  • Page 10 1-B2. 1-B3. 1-B4. Installation Guide...
  • Page 11 1-B5. Installation Guide...
  • Page 12 Installation Guide...
  • Page 13 Installation Guide...

  • Page 14: Using The Camera With A Truvision Recorder Or Another System

    Using the camera with TruVision Navigator A camera can either be connected to a TruVision, or it can be added directly to TruVision Navigator. Please refer to the TruVision Navigator user manual for instructions on operating the camera with TruVision Navigator.
  • Page 15 2. Select the appropriate lens according to the following table: Min. recognition distance Max. recognition distance Lens (mm) 2.8~12 8~32 3.8~16 11~40 3. Choose the desired installation height when the pitch angle is 30° (the pitch angle is the angle between the camera/vehicle line and the road). Min.
  • Page 16 4. The pitch angle should be greater than 15°and less than 30°. ≤ Pitch angle too small Pitch angle too large Pitch angle OK 5. The angle between the direction of the moving vehicle (1) and the vertical direction (2) should be less than 30°.
  • Page 17 For example: >30°，too large >30°，too large <30° OK <30° OK 6. The number of pixel required to identify the following items: Number of Pixels Vehicle Type Plate Character Vehicle Brand Recognition Recognition Recognition (*) 27 <Height <40 >34 x 34 >345 135 <Width <270 * Note: To recognize the vehicle type (car, truck, bus, etc**), the camera needs to be...

  • Page 18: Specifications

    Specifications Electrical Voltage input 12 VDC, PoE+ (IEEE 802.3at) Power consumption Max. 14.28 W Miscellaneous Connectors Audio In/Out, Alarm In/Out, 12 VDC Power Input, Network Port (PoE), RS-485, AUX Power Output, Wiegand Interface Operating temperature -30 to +60 °C (-22 to +140 °F) 405 ×...

Table of Contents