Hutting O N Our C Eane How To Shut Down Your Ressure Cleaner - bar BAR4013C-HJ User Manual

E haust heat gases can ignite combustibles, structures or damage
• DO NOT touch hot parts and avoid hot e haust gases.
• Allow equipment to cool for at least 15 minutes before touching.
eep at least 5 feet (1.5 m) of clearance on all sides of pressure
•
cleaner (including overhead) while in operation.
o to hut our Pressure Cleaner o n
1. Release spray gun trigger and let engine idle down. Ad ust throttle to idle.
See page 14 or engine manual provi e .
2. Turn the engine switch to the OFF position.
3. ALWA S point spray gun in a safe direction, squeeze spray gun trigger to
release retained high water pressure.
4. Disconnect all hoses and guns and remove any held water before storage.
IM O TANT Spray gun traps high water pressure, even when engine is
stopped and water is disconnected. Couplers will not release if under
pressure.
S TTIN O N O
A NIN
C EANE
23