Shutting Down Your Cleaner; How To Shut Down Your Pressure Cleaner - bar BAR4013-HJ User Manual

Exhaust heat/gases can ignite combustibles, structures or damage
• DO NOT touch hot parts and avoid hot exhaust gases.
• Allow equipment to cool for at least 15 minutes before touching.
• Keep at least 5 feet (1.5 m) of clearance on all sides of pressure
cleaner (including overhead) while in operation.
How to Shut Your Pressure Cleaner Down
1. Release spray gun trigger and let engine idle down. Adjust throttle to idle.
See page 14 or engine manual provided.
2. Turn the engine switch to the OFF position.
3. ALWAYS point spray gun in a safe direction, squeeze spray gun trigger to
release retained high water pressure.
4. Disconnect all hoses and guns and remove any held water before storage.
IMPORTANT: Spray gun traps high water pressure, even when engine is
stopped and water is disconnected. Couplers will not release if under
pressure.

SHUTTING DOWN YOUR CLEANER

WARNING
23