Tarting Our C Eane How To Start Your Ressure Cleaner - bar BAR4013C-HJ User Manual

o to tart our Pressure Cleaner
To start your pressure cleaner for the first time, follow these instructions step-
by-step. This starting information also applies if you have let the
pressure cleaner sit idle for at least a day.
1. lace pressure cleaner near an outside water source capable of supplying
water at a flow rate of at least 1G M greater than the rated flow of your
pressure cleaner. It should also be no less than 20 SI at pressure cleaner
end of garden hose. DO NOT siphon standing water.
2. Make sure unit is in a level position and apply handbrake (if fitted) or
"chock" wheels as needed.
3. Connect garden hose to water inlet on pressure cleaner pump or tank.
DO NOT run the pump without the water supply connected
and turned on.
• Damage to equipment resulting from failure to follow this
instruction will void warranty.
4. Choose desired spray tip, pull back nozzle e tension collar, insert spray
tip and release collar. Tug on spray tip to make sure it is securely in place.
See Spray Tips.
STA TIN
NOTICE
O C EANE
19