Assem Ly; Unpack The Ressure Washer; Attach Handle - bar BAR4013C-HJ User Manual

our pressure cleaner requires some assembly and is ready for use after it
has been properly serviced with the recommended oil and fuel. We
recommend AE
and niversal Tractor Transmission Oil for pump. See page 5.
If you have any problems with the assembly of your pressure cleaner, please
call our support line. If calling for assistance, please have the model and
serial number from the data tag available.
npac the Pressure Cleaner
1. Remove the parts bag, accessories, and inserts included with pressure
cleaner.
2. Open bo completely by cutting each corner from top to bottom.
3. Ensure all contents are present prior to assembly.
Attach andle
1. lace handle (A))onto handle supports (B) connected to main unit.
Make sure holes in handle align with holes on handle supports.
NOTE These diagrams are intended for general reference. As a result, they
2. Insert carriage bolts through holes from inside of unit and attach
nuts from outside of unit. Tighten using spanner.
3. Insert multi-colored quick connect spray tips and other supplied accesso-
ries in spaces provided on panel.
Oil for engines. AE 90 Gear Oil for gearbo units
A
ASSEM
17