Table of Contents
Advertisement
E O E ATION C EC
ollo
the steps elo
1. Check to ensure the engine oil is at the proper level. se AE
2.
Check the handle in the frame to ensure they are tight and will not vibrate
loose.
3.
Add fuel to the fuel tank. Be careful not to spill while filling and do not overfill.
This engine is certified to operate on unleaded petrol ith octane rating
of
or higher
4. Connect and tighten the garden hose to the GHA (garden hose inlet)
connection.
5. Connect high pressure hose to the pump outlet. Connect the other end to
the spray gun.
ater must e turned on prior to starting the cleaner pull the
**
spray trigger to ensure
no le
ithout any lea s efore starting the unit Tan units
flo
ater until started. Tan must e full efore starting.
6. Review the safety guidelines in the manual prior to starting the unit. If you
have any issues operating the pressure cleaner, call our customer service
line.
lways check the level of the engine oil prior to starting
A
the cleaner. Oil level of the pump gearbo should be at
about halfway up the sight glass. If your unit does not
have one, use the oil dipstick. The level should be about
halfway up the dipstick.
• Failure to do so could cause the engine to seize if the oil is
low or empty.
Connect ose and
DO NOT start your pressure cleaner without
the water supply turned on.
• Failure to do so will result in damaging the pump from
overheating and void the warranty.
18
IST
prior to using the machine e ery time
ater is mo ing through the lines and out the
A NIN
ater upply to Pump efore tarting
A NIN
Oil.
ill not
**
Advertisement
Table of Contents
Troubleshooting
