Important Preparation Suggestions - GE Moffat MCP2024DXBB Installation Instructions Manual

CUTOUT
A
WIDTH
24" (60 cm) 22 5/8"
(57.4 cm)
22 13/16"
(58.0 cm)
IMPORTANT
Under the cooktop it is necessary to install a partition as
shown in figure 2-3.

Important preparation suggestions

1. Chamfer all exposed edges of decorative laminate to
prevent damage from chipping.
2. Radius corners of cutout and file to insure smooth
edges and prevent corner cracking. Recommend 1/4"
or 3/8" diameter drill in each corner.
3. Rough edges, inside corners which have not been
rounded and forced fits can contribute to cracking of the
countertop laminate.
Installation Instructions
B C
19-1/4" 24"
(49.0 cm) (60 cm) min.
19-9/16"
(49.7 cm)
D E
18" (45.7 cm) 30" (76.2 cm)
min. Height min. (see
from note*)
countertop to Clearance from
nearest cabinet countertop to
on either side unprotected
of unit. overhead
surface.
*NOTE: 24" (61 cm) min. clearance if bottom of wood or
metal cabinets is protected by not less than 1/4" (0.6 cm)
flame retardant millboard covered with no less than No. 28
MSG sheet steel 0.015" (0.04 cm) stainless steel, or 0.024"
(0.06 cm) aluminum or 0.020" (0.05cm) copper. 30" (76.2
cm) min. clearance between top of cooking platform and
bottom of unprotected wood or metal cabinet.
This cooktop has been designed with wide tolerances
of cut-out to cover possible replacement with other
brands. We recommend to that you consider the
minimum dimension of cutout size In the case of new
installation.
Some cut out sizes for possible replacements:
Dimension
24" 22 13/16" x 19-9/16"
3
F
2" (5 cm) min. 13" (33 cm)
Clearance from Depth of
cutout to side unprotected
wall on the left overhead
and right of the cabinets.
unit.
Inches cm
58,0 x 49,7
G