Table of Contents
Advertisement
85MIR3 / 85MIR3-L
3-2 BIOS SETUP by CMOS Setup Utility
1. Power on your system.
2. At the initial screen, enter CMOS Setup Utility by pressing < Del >
key before POST(Power on Self Test) is complete and the main
program screen will appear as follows.
AMIBIOS NEW SETUP UTILITY - VERSION 3.31a
Standard CMOS Features
Advanced BIOS Features
Advanced Chipset Features
Power Management Features
PNP/PCI Configurations
Integrated Peripherals
Hardware Monitor Status
Frequency/Voltage Control
F1: Help
Defaults
Esc: Exit
F10: Save and Exit
Set Time, Date, Hard Disk Type ...
3. Use the arrow keys on your keyboard to select an option, and press
<Enter>. Modify the system parameters to reflect the options installed
in your system.
4. You may return to the Main Menu anytime by pressing <Esc>.
5. In the Main Menu, "Save Changes and Exit" saves your changes and
reboots the system, and "Discard Changes and Exit" ignores your
changes and exits the program.
• Standard CMOS Features(Times, Date, Hard Disk Type etc.)
• Advanced BIOS Features (Virus Protection, Boot Sequence etc.)
• Advanced Chipset Features (AT Clock, DRAM Timing etc.)
• Power Management Features ( Sleep Timer, Suspend Timer etc.)
• PNP/PCI Configurations (IRQ Settings, Latency Timers etc.)
• Integrated Peripherals ( Onboard IO, IRQ, DMA Assign. etc.)
• Hardware Monitor Status (CPU/System Temp., Fan speed etc.)
• Frequency/Voltage (CPU clock, Voltage of CPU, DIMM, AGP etc.)
: Select Item
+/- : Change Values
: Select Menu
16
Set Supervisor Password
Load Optimal Defaults
Save & Exit Setup
Exit Without Saving
F9: Setup
Enter: Select
Sub-Menu
Advertisement
Table of Contents
