How To Use The Console - Weslo MOMENTUM G4.1 User Manual

HOW TO USE THE CONSOLE

CONSOLE DIAGRAM
FEATURES OF THE CONSOLE
The easy-to-use console features five modes that
provide instant exercise feedback during your
workouts.
Scan (SCAN)—This mode displays the time, speed,
distance, and calories modes, for a few seconds each,
in a repeating cycle.
Time (TIME)—This mode displays the elapsed time.
Speed (SPD)—This mode displays your pedaling
speed, in miles per hour.
Distance (DIST)—This mode displays the distance
you have pedaled during your workout, in miles.
Calories (CAL)—This mode displays the approxi-
mate number of calories you have burned during your
workout.
HOW TO USE THE CONSOLE
Make sure that batteries (not included) are installed in
the console (see assembly step 13 on page 13). If
there is a sheet of plastic on the console, remove the
plastic.
1. Turn on the console.
To turn on the console, press the button on the
console or simply begin pedaling.
2. Begin pedaling and follow your progress with
the display.
Scan mode—To select the scan mode, press the
MODE button repeatedly until the word SCAN
appears in the display.
Time, speed, distance, calories mode—To select
one of these modes for continuous display, press
the MODE button repeatedly until the name of the
desired mode appears in the display. Make sure
that the word SCAN does not appear in the display.
As you exercise, the console will provide instant
feedback about your workout.
To pause the console, stop pedaling. To continue
your workout, simply resume pedaling.
To reset the displays to zero, press and hold the
MODE button for 3 seconds.
3. When you are finished exercising, the console
will turn off automatically.
If the pedals do not move for a few seconds, the
console will pause.
The console has an auto-off feature. If the pedals
do not move and the console button is not pressed
for a few minutes, the power will turn off automati-
cally to save the batteries.
16