DFI-ITOX G5G100-P User Manual page 70

3
BIOS Setup
Advanced Chipset Features
The screen above list all the fields available in the Advanced Chipset Features
submenu, for ease of reference in this manual. In the actual CMOS setup, you have
to use the scroll bar to view the fields. The settings on the screen are for reference
only. Your version may not be identical to this one.
This section gives you functions to configure the system based on
the specific features of the chipset. The chipset manages bus speeds
and access to system memory resources.
be altered unless necessary.
because they provide the best operating conditions for your system.
The only time you might consider making any changes would be if
you discovered some incompatibility or that data was being lost
while using your system.
DRAM Timing Selectable
This field is used to select the timing of the DRAM.
By SPD
Manual
70
The default settings have been chosen
The EEPROM on a DIMM has SPD (Serial Pres-
ence Detect) data structure that stores information
about the module such as the memory type,
memory size, memory speed, etc. When this option
is selected, the system will run according to the
information in the EEPROM. This option is the
default setting because it provides the most stable
condition for the system. The "CAS Latency Time"
to "System Memory Frequency" fields will show the
default settings by SPD.
If you want better performance for your system
other than the one "by SPD", select "Manual" then
These items should not