Table of Contents
Advertisement
3
BIOS Setup
TM2 Bus VID
This field is used to select the voltage of the throttled performance
state that will be initiated when the on-die sensor turns from cool to
hot.
Execute Disable Bit
When this field is set to Disabled, it will force the XD feature flag to
always return to 0.
Hard Disk Boot Priority
This field is used to select the boot sequence of the hard drives.
Move the cursor to this field then press <Enter>. Use the Up or
Down arrow keys to select a device then press <+> to move it up
or <-> to move it down the list.
The settings on the screen are for reference only. Your version may not be identical
to this one.
66
Advertisement
Table of Contents
