DFI-ITOX G5G100-P User Manual page 21

Installing the Fan and Heat Sink
The CPU must be kept cool by using a CPU fan with heat sink.
Without sufficient air circulation across the CPU and heat sink, the
CPU will overheat damaging both the CPU and system board.
Note:
• Use only the fan and heat sink assembly included in the
system board package.
• The fan and heat sink package contains the fan and heat
sink assembly, and a retension module base.
1. Match and insert the screw holes of the retention module base
to the mounting holes around the CPU socket from the bottom
through the top of the system board.
Screw hole
Screw hole
CPU fan and
heat sink assembly
Screw hole
Screw hole
Buttom view of the system board
Hardware Installation
Retention
module base
2
21