DFI-ITOX G5G100-P User Manual page 53

IrDA Connector
IRRX
N. C. Ground
VCC
IRTX
1
Connect your IrDA cable to connector IR1 on the system board.
Note:
The sequence of the pin functions on some IrDA cable may be
reversed from the pin function defined on the system board.
Make sure to connect the cable to the IrDA connector
according to their pin functions.
BIOS Setting
Configure the onboard IrDA in the Integrated Peripherals submenu
of the BIOS to the type of IrDA standard supported by your
device.
Driver Installation
You may need to install the proper drivers in your operating system
to use the IrDA function. Refer to your operating system's manual or
documentation for more information.
5
Hardware Installation
2
53