DFI-ITOX G5G100-P User Manual page 45

LVDS LCD Panel, LCD/Inverter Power and LCD AUX Power
Connectors
The system board allows you to connect a LCD Display Panel by
means of the LVDS LCD panel connector (CN7) and the LCD/
Inverter power connector (CN8). These connectors transmit video
signals and power from the system board to the LCD Display Panel.
The LCD AUX power connector is used to connect auxiliary power
to the LCD panel. Refer to the next page for the pin functions of
these connectors.
Jumper Settings
Refer to the "Jumper Settings" section in this chapter for settings
relevant to the LCD panel.
Hardware Installation
LCD AUX
LCD/Inverter
1
Power
1
LVDS LCD Panel
2
1
2
Power
3
8
45