Page 1
G5G100-L10C System Board User’s Manual 935-G5G101-500G A05000817...
Page 2
Copyright This publication contains information that is protected by copyright. No part of it may be reproduced in any form or by any means or used to make any transformation/adaptation without the prior written permission from the copyright holders. This publication is provided for informational purposes only. The manufacturer makes no representations or warranties with respect to the contents or use of this manual and specifically disclaims any express or implied warranties of merchantability or fitness for any...
FCC and DOC Statement on Class B This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a residential installation.
Introduction Table of Contents About this Manual................Warranty..................... Static Electricity Precaution..............Safety Measures..................About the Package................Before Using the System Board............Chapter 1 - Introduction..............Specifications........................... Special Features of the System Board..............Chapter 2 - Hardware Installation............ System Board Layout ......................System Memory..........................
Introduction About this Manual An electronic file of this manual is included in the CD. To view the user’s manual in the CD, insert the CD into a CD-ROM drive. The autorun screen (Main Board Utility CD) will appear. Click “User’s Manual”...
Introduction Static Electricity Precautions It is quite easy to inadvertently damage your PC, system board, components or devices even before installing them in your system unit. Static electrical discharge can damage computer components without causing any signs of physical damage. You must take extra care in handling them to ensure against electrostatic build-up.
Introduction About the Package The system board package contains the following items. If any of these items are missing or damaged, please contact your dealer or sales representative for assistance. The system board A user’s manual One IDE cable One USB cable One Serial ATA data cable One Serial ATA power cable One bracket mounted with a serial port...
Introduction Chapter 1 - Introduction Specifications ® ® Processor • Intel Celeron M 373 1GHz, 512K cache processor (ULV) - 400MHz system data bus Chipset ® • Intel chipset ® - Intel 910GMLE Graphics Memory Controller Hub (GMCH) ® - Intel 82801FBM I/O Controller Hub (ICH6M) System Memory •...
Page 9
Introduction I/O Connectors • 2 connectors for 4 additional external USB 2.0/1.1 ports • 1 connector for 1 external serial port • 1 front audio connector for line-out and mic-in jacks • 1 CD-in connector • 1 S/PDIF-in/out connector • 2 Serial ATA connectors •...
Introduction Features Double Data Rate SDRAM (DDR SDRAM) is a type of SDRAM that doubles the data rate through reading and writing at both the rising and falling edge of each clock. This effectively doubles the speed of operation therefore doubling the speed of data transfer.
Page 11
Introduction The system board supports USB 2.0 and USB 1.1 ports. USB 1.1 supports 12Mb/second bandwidth while USB 2.0 suppor ts 480Mb/second bandwidth providing a marked improvement in device transfer speeds between your com- puter and a wide range of simultaneously accessible external Plug and Play peripherals.
Page 12
Introduction This function allows you to use a USB wake-on-USB keyboard to wake up a system from the S3 (STR - Suspend To RAM) state. Important: If you are using the Wake-On-USB Keyboard function for 2 USB ports, the 5V_standby power source of your power supply must support ≥...
Hardware Installation Chapter 2 - Hardware Installation System Board Layout ATX power Mouse IrDA COM 4 RS232/ 2nd fan CPU fan AUX select (JP3) COM 1 COM 2 COM 3 Intel Celeron M 373 910GMLE 1GHz COM 4 Chassis Open chip USB 1 USB 2...
Hardware Installation Warning: Electrostatic discharge (ESD) can damage your system board, proces- sor, disk drives, add-in boards, and other components. Perform the upgrade instruction procedures described at an ESD workstation only. If such a station is not available, you can provide some ESD protection by wearing an antistatic wrist strap and attaching it to a metal part of the system chassis.
Hardware Installation Installing the DIM Module A DIM module simply snaps into a DIMM socket on the system board. Pin 1 of the DIM module must correspond with Pin 1 of the socket. Notch Pin 1 1. Pull the “tabs” which are at the ends of the socket to the side. 2.
Hardware Installation Jumper Settings Clear CMOS Data 1-2 On: Normal (default) 2-3 On: J_CMOS1 Clear CMOS Data If you encounter the following, a) CMOS data becomes corrupted. b) You forgot the supervisor or user password. you can reconfigure the system with the default values stored in the ROM BIOS.
Hardware Installation USB Power Select USB 5-8 (JP5) 1-2 On: 5V 2-3 On: (default) 5V_standby USB 1-4 (JP1) 1-2 On: 5V 2-3 On: (default) 5V_standby JP1 and JP5 are used to select the power of the USB por ts. Selecting 5V_standby will allow you to use a USB keyboard to wake up the system.
Page 18
Hardware Installation COM 4 RS232/AUX Select COM 4 is an RS-232 port. If the serial device connected to this port requires 5V/12V power from the system board, set JP3 pins 1-3, 2-4, 9-11 (12V) and 10-12 (5V) to On. Otherwise, leave this jumper’s setting at 1-3, 2-4, 7-9, 8-10 On.
Page 19
Hardware Installation Power-on Select 2-3 On: 1-2 On: Power-on via Power-on via JP10 power button AC power (default) JP10 is used to select the method of powering on the system. If you want the system to power-on whenever AC power comes in, set JP10 pins 1 and 2 to On.
Hardware Installation Rear Panel I/O Ports PS/2 COM 4 COM 1 Mic-in Mouse USB 4 Line-in Line-out COM 2 USB 1-2 USB 3 PS/2 The rear panel I/O ports consist of the following: • PS/2 mouse port • PS/2 keyboard port •...
Page 21
Hardware Installation PS/2 Mouse and PS/2 Keyboard Ports PS/2 Mouse PS/2 Keyboard These ports are used to connect a PS/2 mouse and a PS/2 key- board. The PS/2 mouse por t uses IRQ12. If a mouse is not connected to this port, the system will reserve IRQ12 for other expansion cards.
Hardware Installation Serial Ports COM 1 COM 2 COM 4 DCD- DTR- COM 3 DSR- RTS- CTS- 1 2 3 4 5 1 2 3 4 5 6 7 8 9 6 7 8 9 RS232 RS485 (COM 4 only) The system board is equipped with 3 onboard serial ports (COM 1, COM2 and COM4).
Page 23
Hardware Installation Jumper Setting If the serial device connected to COM 4 requires auxiliary power from the system board, set JP3 appropriately. Refer to “COM 4 RS232/AUX Select” in this chapter for more information. BIOS Setting Configure the serial ports in the Integrated Peripherals submenu (“Super IO Device”...
Hardware Installation VGA Port The VGA port is used for connecting a VGA monitor. Connect the monitor’s 15-pin D-shell cable connector to the VGA port. After you plug the monitor’s cable connector into the VGA port, gently tighten the cable screws to hold the connector in place. BIOS Setting Configure the onboard VGA in the Advanced Chipset Features submenu of the BIOS.
Page 25
Hardware Installation RJ45 Fast-Ethernet Port The LAN port allows the system board to connect to a local area network by means of a network hub. BIOS Setting Configure the onboard LAN in the Integrated Peripherals submenu (“Onboard Device” section) of the BIOS. Refer to chapter 3 for more information.
Page 26
Hardware Installation Universal Serial Bus Connectors USB 2 USB 1 USB 5-6 USB 7-8 USB 4 USB 3 USB allows data exchange between your computer and a wide range of simultaneously accessible external Plug and Play peripherals. The system board supports 4 onboard USB 2.0/1.1 ports. The USB 5-6 and USB 7-8 connectors allow you to connect 4 additional USB 2.0/1.1 ports.
Page 27
Hardware Installation Driver Installation You may need to install the proper drivers in your operating system to use the USB device. Refer to your operating system’s manual or documentation for more information. Refer to chapter 4 for more information about installing the USB 2.0 drivers.
Page 28
Hardware Installation Audio (Rear Audio and Front Audio) Mic-in Line-in Rear audio Line-out Front audio Rear Audio The system board is equipped with 3 audio jacks. A jack is a one- hole connecting interface for inserting a plug. • Mic-in (Pink) In a 2-channel or 4-channel mode, this jack is used to connect an external microphone.
Page 29
Hardware Installation • Line-out (Lime) In a 2-channel mode, this jack is used to connect a headphone or external speakers. In a 4-channel or 6-channel mode, this jack functions as front right/left speaker out. 2-channel 4-channel 6-channel Light Blue Line-in Rear R/L Rear R/L Lime...
Hardware Installation I/O Connectors CD-in Internal Audio Connector Right audio channel Ground Ground Left audio channel The CD-in connector is used to receive audio from a CD-ROM drive, TV tuner or MPEG card.
Page 31
Hardware Installation S/PDIF Connector SPDIF out SPDIF in The S/PDIF connector is used to connect external S/PDIF ports. Your S/PDIF ports may be mounted on a card-edge bracket. Install the card-edge bracket to an available slot at the rear of the system chassis then connect the audio cable to this connector.
Hardware Installation Floppy Disk Drive Connector The system board is equipped with a 26-pin FPC type floppy disk drive connector. Only connect a 1.44MB slim-type floppy disk drive. Floppy drives other than the one mentioned above are optional. Refer to the next page for the pin function of this connector. Connecting the Floppy Disk Drive Cable Install one end of the floppy disk drive cable into the floppy disk connector on the system board and the other end of the connector...
Page 33
Hardware Installation FPC Type FDD Connector Pins Pins Function Function INDEX# DR0# DSKCH# N. C. N. C. N. C. MTR0# DIR# N. C. DRVDE0 STEP# WDATA# WGATE# TRK0# WRPRO# RDATA# HDSEL#...
Hardware Installation Serial ATA Connectors SATA 1 SATA 2 The system board is equipped with two Serial ATA connectors for connecting Serial ATA devices. Connect one end of the Serial ATA cable to SATA 1 or SATA 2 and the other end to your Serial ATA device.
Hardware Installation IDE Disk Drive Connectors The IDE connector will interface two Enhanced IDE (Integrated Drive Electronics) disk drives. The IDE cable can be inserted into this connector only if pin 1 of the cable is aligned with pin 1 of this connector.
Page 36
Hardware Installation Adding a Second IDE Disk Drive When using two IDE drives, one must be set as the master and the other as the slave. Follow the instructions provided by the drive manufacturer for setting the jumpers and/or switches on the drives. The system board suppor ts Enhanced IDE or ATA-2, ATA/33, ATA/66 and ATA/100 hard drives.
Hardware Installation IrDA Connector IRRX N. C. Ground IRTX Connect the cable connector from your IrDA module to the IrDA connector on the system board. Note: The sequence of the pin functions on some IrDA cable may be reversed from the pin function defined on the system board. Make sure to connect the cable to the IrDA connector according to their pin functions.
Hardware Installation Cooling Fan Connectors Ground Power Sense System fan Sense Ground Power Connect the CPU fan’s cable connector to the CPU fan connector on the system board. The 2nd fan and system fan connectors are used to connect additional cooling fans. The cooling fans will provide adequate airflow throughout the chassis to prevent overheating the CPU and system board components.
Page 39
Hardware Installation Chassis Open Connectors Ground Chassis signal The system board supports the chassis intrusion detection function. Connect the chassis intrusion sensor cable from the chassis to the chassis open connector on the board. Whenever a chassis component has been removed, the sensor sends signal to the connector alerting you of a chassis intrusion event.
Hardware Installation Power Connectors Use a power supply that complies with the ATX12V Power Supply Design Guide Version 1.1. An ATX12V power supply has a standard 20-pin ATX main power connector that must be inserted into this connector. The system board requires a minimum of 150 Watt power supply to operate.
Hardware Installation Front Panel Connectors RESET SW HDD-LED PWR-LED PWR-BTN HDD-LED - HDD LED This LED will light when the hard drive is being accessed. RESET SW - Reset Switch This switch allows you to reboot without having to power off the system.
BIOS Setup Chapter 3 - BIOS Setup Award BIOS Setup Utility The Basic Input/Output System (BIOS) is a program that takes care of the basic level of communication between the processor and pe- ripherals. In addition, the BIOS also contains codes for various ad- vanced features found in this system board.
BIOS Setup Standard CMOS Features Use the arrow keys to highlight “Standard CMOS Features” and press <Enter>. A screen similar to the one below will appear. Phoenix - AwardBIOS CMOS Setup Utility Standard CMOS Features Mon, Apr 14 2008 Date <mm:dd:yy> Item Help Time <hh:mm:ss>...
BIOS Setup IDE Channel 0 Master, IDE Channel 0 Slave, IDE Channel 1 Master and IDE Channel 1 Slave To configure the IDE drives, move the cursor to a field then press <Enter>. The following screen will appear. Phoenix - AwardBIOS CMOS Setup Utility IDE Channel 0 Master IDE HDD Auto-Detection Press Enter...
Page 45
BIOS Setup Capacity Displays the approximate capacity of the disk drive. Usually the size is slightly greater than the size of a formatted disk given by a disk checking program. Cylinder This field displays the number of cylinders. Head This field displays the number of read/write heads. Precomp This field displays the number of cylinders at which to change the write timing.
Page 46
BIOS Setup Video This field selects the type of video adapter used for the primary system monitor. Although secondary monitors are supported, you do not have to select the type. The default setting is EGA/VGA. EGA/VGA Enhanced Graphics Adapter/Video Graphics Array. For EGA, VGA, SVGA and PGA monitor adapters.
Page 47
BIOS Setup Extended Memory Displays the amount of extended memory detected during boot-up. Total Memory Displays the total memory available in the system.
BIOS Setup Advanced BIOS Features The Advanced BIOS Features allows you to configure your system for basic operation. Some entries are defaults required by the system board, while others, if enabled, will improve the performance of your system or let you set some features according to your preference. Phoenix - AwardBIOS CMOS Setup Utility Advanced BIOS Features Item Help...
Page 49
BIOS Setup CPU Feature This field is used to configure the CPU that is installed on the sys- tem board. Move the cursor to this field then press <Enter>. Phoenix - AwardBIOS CMOS Setup Utility CPU Feature Delay Prior to Thermal 16 Min Item Help Thermal Management...
BIOS Setup Hard Disk Boot Priority This field is used to select the boot sequence of the hard drives. Move the cursor to this field then press <Enter>. Use the Up or Down arrow keys to select a device then press <+> to move it up or <->...
Page 51
BIOS Setup Security Option This field determines when the system will prompt for the password - everytime the system boots or only when you enter the BIOS setup. Set the password in the Set Supervisor/User Password submenu. System The system will not boot and access to Setup will be denied unless the correct password is entered at the prompt.
BIOS Setup Advanced Chipset Features Phoenix - AwardBIOS CMOS Setup Utility Advanced Chipset Features System BIOS Cacheable Enabled Item Help Video BIOS Cacheable Disabled Menu Level Memory Hole At 15M-16M Disabled ** VGA Setting ** On-Chip Frame Buffer Size DVMT Mode DVMT DVMT/FIXED Memory Size 128MB...
Page 53
BIOS Setup Video BIOS Cacheable As with caching the system BIOS, enabling the Video BIOS cache will allow access to video BIOS addresssed at C0000H to C7FFFH to be cached, if the cache controller is also enabled. The larger the range of the Cache RAM, the faster the video performance.
BIOS Setup Integrated Peripherals Phoenix - AwardBIOS CMOS Setup Utility Integrated Peripherals Press Enter OnChip IDE Device Item Help Press Enter Onboard Device Menu Level Super IO Device Press Enter ↑↓→← : Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help F5: Previous Values F6: Fail-Safe Defaults...
Page 55
BIOS Setup On-Chip Primary PCI IDE and On-Chip Secondary PCI IDE These fields allow you to enable or disable the primary and second- ary IDE controller. The default is Enabled. Select Disabled if you want to add a different hard drive controller. IDE Primary Master/Slave UDMA and IDE Secondary Master/ Slave UDMA These fields allow you to set the Ultra DMA in use.
Page 56
BIOS Setup PATA IDE Mode and SATA Port This field is used to select the function mode for the IDE 1 connec- tor and its relation to the SATA ports. Primary IDE 1 serves as Primary Master and Primary Slave channel. SATA 1 and SATA 2 serve as Secondary Master and Secondary Slave channel.
BIOS Setup Onboard Device Move the cursor to this field and press <Enter>. The following screen will appear. Phoenix - AwardBIOS CMOS Setup Utility Onboard Device USB Controller Enabled Item Help Enabled USB 2.0 Controller Menu Level USB Keyboard Support Disabled AC97 Audio Auto...
Page 58
BIOS Setup AC97 Audio Auto Select this option when using the onboard audio codec. Disabled Select this option when using a PCI sound card. Onboard LAN Control Auto The system automatically detects the onboard LAN. Disabled Disables the onboard LAN.
BIOS Setup Super IO Device Move the cursor to this field and press <Enter>. The following screen will appear. Phoenix - AwardBIOS CMOS Setup Utility Super IO Device Onboard FDC Controller Enabled Item Help Serial Port 1 Mode Normal Menu Level IrDA Duplex Mode Full Onboard Serial Port 1...
Page 60
BIOS Setup Onboard Serial Port 1 to Onboard Serial Port 4 3F8, 2F8, 3E8, 2E8 Allows you to manually select an I/O address for the serial port. Disabled Disables the serial por t. Serial Port 1 Use IRQ to Serial Port 4 Use IRQ These fields are used to select an IRQ for the onboard serial port.
BIOS Setup Power Management Setup The Power Management Setup allows you to configure your system to most effectively save energy. Phoenix - AwardBIOS CMOS Setup Utility Power Management Setup ACPI Function Enabled Item Help ACPI Suspend Type S1(POS) Menu Level Instant-Off Soft-Off By PWR-BTTN Disabled...
Page 62
BIOS Setup Soft-Off by PWR-BTTN This field allows you to select the method of powering off your system. Delay 4 Sec. Regardless of whether the Power Management func- tion is enabled or disabled, if the power button is pushed and released in less than 4 sec, the system enters the Suspend mode.
Page 63
BIOS Setup Resume By Alarm Enabled When Enabled, you can set the date and time you would like the Soft Power Down (Soft-Off) PC to power-on in the “Date (of Month) Alarm” and “Time (hh:mm:ss) Alarm” fields. However, if the system is being accessed by incoming calls or the network (Resume On Ring/LAN) prior to the date and time set in these fields, the system will give priority to the incoming calls...
Page 64
BIOS Setup PnP/PCI Configurations This section shows how to configure the PCI bus system. It covers some very technical items and it is strongly recommended that only experienced users should make any changes to the default settings. Phoenix - AwardBIOS CMOS Setup Utility PnP/PCI Configurations Init Display First PCI Slot...
BIOS Setup Resources Controlled By The Award Plug and Play BIOS has the capability to automatically configure all of the boot and Plug and Play compatible devices. Auto(ESCD) The system will automatically detect the settings for you. Manual Choose the specific IRQ resources in the “IRQ Re- sources”...
BIOS Setup PC Health Status Phoenix - AwardBIOS CMOS Setup Utility PC Health Status Current System Temp Item Help C / 91 Current CPU Temperature C / 80 Menu Level Current System Fan Speed 0 RPM Current CPU Fan Speed 0 RPM Current 2nd Fan Speed 0 RPM...
BIOS Setup Frequency/Voltage Control Phoenix - AwardBIOS CMOS Setup Utility Frequency/Voltage Control Disabled Spread Spectrum Item Help Menu Level ↑↓→← : Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults The settings on the screen are for reference only.
BIOS Setup Load Fail-Safe Defaults The “Load Fail-Safe Defaults” option loads the troubleshooting de- fault values permanently stored in the ROM chips. These settings are not optimal and turn off all high performance features. You should use these values only if you have hardware problems. Highlight this option in the main menu and press <Enter>.
BIOS Setup Load Optimized Defaults The “Load Optimized Defaults” option loads optimized settings from the BIOS ROM. Use the default values as standard values for your system. Highlight this option in the main menu and press <Enter>. Phoenix - AwardBIOS CMOS Setup Utility Standard CMOS Features Frequency/Voltage Control Advanced BIOS Features...
BIOS Setup Set Supervisor Password If you want to protect your system and setup from unauthorized entry, set a supervisor’s password with the “System” option selected in the Advanced BIOS Features. If you want to protect access to setup only, but not your system, set a supervisor’s password with the “Setup”...
BIOS Setup Set User Password If you want another user to have access only to your system but not to setup, set a user’s password with the “System” option se- lected in the Advanced BIOS Features. If you want a user to enter a password when trying to access setup, set a user’s password with the “Setup”...
BIOS Setup Save & Exit Setup When all the changes have been made, highlight “Save & Exit Setup” and press <Enter>. Phoenix - AwardBIOS CMOS Setup Utility Standard CMOS Features Frequency/Voltage Control Advanced BIOS Features Load Fail-Safe Defaults Advanced Chipset Features Load Optimized Defaults Integrated Peripherals Set Supervisor Password...
BIOS Setup Exit Without Saving When you do not want to save the changes you have made, high- light “Exit Without Saving” and press <Enter>. Phoenix - AwardBIOS CMOS Setup Utility Standard CMOS Features Frequency/Voltage Control Advanced BIOS Features Load Fail-Safe Defaults Advanced Chipset Features Load Optimized Defaults Integrated Peripherals...
BIOS Setup Updating the BIOS To update the BIOS, you will need the new BIOS file and a flash utility, AWDFLASH.EXE. Please contact technical support or your sales representative for the files. 1. Save the new BIOS file along with the flash utility AWDFLASH.EXE to a floppy disk.
Page 75
BIOS Setup 6. The following will appear. Do You Want to Save BIOS (Y/N) This question refers to the current existing BIOS in your system. We recommend that you save the current BIOS and its flash utility; just in case you need to reinstall the BIOS. To save the current BIOS, press <Y>...
Supported Software Chapter 4 - Supported Software Drivers, Utilities and Software Applications The CD that came with the system board contains drivers, utilities and software applications required to enhance the performance of the system board. Inser t the CD into a CD-ROM drive. The autorun screen (Mainboard Utility CD) will appear.
Supported Software Intel Chipset Software Installation Utility The Intel Chipset Software Installation Utility is used for updating ® Windows INF files so that the Intel chipset can be recognized and configured properly in the system. To install the utility, click “Intel Chipset Software Installation Utility” on the main menu.
Page 78
Supported Software 3. Go through the readme document for more installation tips then click Next. 4. After all setup operations are done, click Next. 5. Click Finish to exit setup.
Supported Software Audio Drivers To install the driver, click “Audio Drivers” on the main menu. 1. Setup is now ready to install the driver. Click Next. 2. The installation wizard will extract the files needed to install AC97 audio. After all files have been extracted, click Next.
Supported Software Intel Graphics Drivers To install the driver, click “Intel Graphics Drivers” on the main menu. 1. Setup is now ready to install the graphics driver. Click Next. 2. Read license agreement then click Yes. 3. Go through the readme document for more installation tips then click Next.
Page 81
Supported Software 4. Setup is currently installing dr iver. After installation has completed, click Next. 5. Click “Yes, I want to restar t this computer now. ” then click Finish. Restarting the system will allow the new software installlation to take effect.
Supported Software LAN Drivers To install the driver, click “LAN Drivers” on the main menu. 1. The installation wizard will extract the files needed to install the driver. 2. You are now ready to install the driver. Click Install. 3. Setup is currently installing the driver.
Page 83
Supported Software 4. After completing installa- tion, click Finish to exit setup.
Supported Software Hardware Monitor for Windows The Hardware Monitor for Windows utility is capable of monitoring the system’s temperature, fan speed, voltage, etc. and allows you to manually set a range (Highest and Lowest Limit) to the items being monitored. If the settings/values are over or under the set range, a warning message will pop-up.
Page 85
Supported Software 3. Click Next to add the program icon to the Program Folder. 4. Hardware Doctor is configuring the new software installation. 5. Follow the prompts on the screen to complete the installation then click Finish. Restarting the system will allow the driver to take effect.
Page 86
Supported Software Microsoft DirectX 9.0C Driver To install, click “Microsoft DirectX 9.0C Driver” on the main menu. 1. Click “I accept the agreement” then click Next. 2. You are now ready to install DirectX. Click Next. 3. Click Finish. Reboot the system for DirectX to take effect.
Supported Software Intel Matrix Storage Manager Utility Intel Matrix Storage Manager is a utility that allows you to monitor the current status of the SATA drives. It enables enhanced performance and power management for the storage subsystem. Note: This utility is supported only when the SATA Mode field is set to AHCI.
Page 88
Supported Software 3. Read license agreement then click Yes. 4. Go through the readme document for system requirements installation tips then click Next. 5. Click “Yes, I want to restar t my computer now” then click Finish. Restarting the system will allow the new software installation to take effect.
Supported Software AHCI for F6 During Windows Setup Floppy Driver This is used to create a floppy driver diskette needed when you install Windows ® XP using the F6 installation method. This will allow you to install the operating system onto a hard drive when in AHCI mode. Click “AHCI for F6 During Windows Setup Floppy Driver”...
Supported Software Installing the AHCI Driver During Windows XP Installation ® The AHCI driver must be installed during the Windows installation using the F6 installation method. This is required in order to install the operating system onto a hard drive when in AHCI mode.
Page 91
Supported Software Installing the AHCI Driver During Windows Vista Installation ® The AHCI driver must be installed during the Windows Vista installation. This is required in order to install the operating system onto a hard drive that is in AHCI mode. Star t Windows Setup by booting from the installation CD.
Page 92
Supported Software The screen on the right will appear.
Page 93
Supported Software Adobe Acrobat Reader 6.0 (English Version) To install, click “Adobe Acrobat Reader 6.0 (English Version)” on the main menu. 1. Click Next to continue. 2. Setup is now ready to install. Click Next. 3. Click Next to install or click Change Destination Folder to select another folder.
Page 94
Supported Software 4. Click Install to begin installation. 5. Click Finish to exit installaion.
Watchdog Timer Appendix A - Watchdog Timer Watchdog Timer The following parameters are references for setting the time interval of the Watchdog Timer function. The system will regularly be “cleared” according to the set time interval. If the system hangs or fails to function, it will also reset according to the time interval so that your system will continue to operate.
System Error Message Appendix B - System Error Message When the BIOS encounters an error that requires the user to correct something, either a beep code will sound or a message will be displayed in a box in the middle of the screen and the message, PRESS F1 TO CONTINUE or DEL TO ENTER SETUP, will be shown in the information box at the bottom.
Page 97
System Error Message setting than indicated in Setup. Determine which setting is correct, either turn off the system and change the jumper or enter Setup and change the VIDEO selection. FLOPPY DISK(S) fail (80) Unable to reset floppy subsystem. FLOPPY DISK(S) fail (40) Floppy type mismatch.
Troubleshooting Appendix C - Troubleshooting Troubleshooting Checklist This chapter of the manual is designed to help you with problems that you may encounter with your personal computer. To efficiently troubleshoot your system, treat each problem individually. This is to ensure an accurate diagnosis of the problem in case a problem has multiple causes.
Troubleshooting The picture seems to be constantly moving. 1. The monitor has lost its vertical sync. Adjust the monitor’s vertical sync. 2. Move away any objects, such as another monitor or fan, that may be creating a magnetic field around the display. 3.
Troubleshooting Hard Drive Hard disk failure. 1. Make sure the correct drive type for the hard disk drive has been entered in the BIOS. 2. If the system is configured with two hard drives, make sure the bootable (first) hard drive is configured as Master and the second hard drive is configured as Slave.
Troubleshooting Keyboard Nothing happens when a key on the keyboard was pressed. 1. Make sure the keyboard is properly connected. 2. Make sure there are no objects resting on the keyboard and that no keys are pressed during the booting process. System Board 1.