PROAIM LB230 Assembly Manual

Snaprig l-bracket

SnapRig L-Bracket

(LB230)

A s s e m b l y M a n u a l

What's In The Box

Please inspect the contents of your shipped package to ensure you have received everything that is listed

below.

Camera bolt size: 1/4

SnapRig L-Bracket

Magnetized Screwdriver

No part of this document may be reproduced, stored in a retrieval system, or transmitted by any form or by any means,

electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permitted by the applicable copyright

statutes or in writing by the Publisher.

Table of Contents

Need help?

Do you have a question about the LB230 and is the answer not in the manual?

Page 1 SnapRig L-Bracket (LB230) A s s e m b l y M a n u a l What’s In The Box Please inspect the contents of your shipped package to ensure you have received everything that is listed below. Camera bolt size: 1/4...
Page 2 SnapRig L-Bracket Setup • There is a magnetized screwdriver at the bottom of the SnapRig. • Use the magnetized screwdriver to loosen the screw. • Now, extend the side plate. • Loosen the knob of the ball head and remove the camera plate.
Page 3 • Now, mount the SnapRig vertically on the ball head. YOUR PROAIM SNAPRIG PROFESSIONAL KIT ALL DRESSED UP AND READY TO GO! (SHOWN WITH OPTIONAL ACCESSORIES) Warranty: We offer one year warranty for our products from date of purchase. Within this period of time, we will repair it without charge for labor or parts.

Snaprig l-bracket lb230