3. Components Installation/Removal
3.1 Removing the Top Cover
1. Unlock the latch with a screw driver.
2. Grab the handle and slide the top cover backwards and lift off.
3.2 Installing the Top Cover
a. Press the top cover and make sure the four corners are engaged with the chassis.
b. Make sure the guide pin and the guide pin hole are well aligned.
c. Grab the latch handle and slide the top cover forwards.
d. Lock the latch with a screw driver.
3.3 Removing the PSU
a. Grab the PSU handle and unlock the module by pulling the PSU lock to the left.
b. Hold the lock and extract the PSU module.
3.4 Installing the PSU
a. Insert PSU module into the bay.
b. The lock will flip to the right automatically when the PSU is seated.