Page 1
DO NOT DISCARD! SIGN LEGEND power OFF power ON don’t touch the LEDs attention use anti-static gloves POWER SUPPLY DIMENSIONS TOOLS REQUIRED (not included) pencil level 2" screwdriver drill 15" anti-static gloves 4" R-LINE R-LINE SUSPENDED R1 SUSPENDED R2 2 ½" 1 ½"...
Page 2
Turn OFF power source before 1. Mark dimensions for mounting 2. Drill out holes for bracers and power feed installation 3. Insert anchors 4. Use wood screws and washers 5. Insert feeder though opening at to secure brackets. the end of the track (Repeat steps 1 -4 for each individual channel) 6.
Page 3
4" 17. Snap track connectors into tracks 18. Snap insets into tracks 19. Installation Technical Support Hotline The XAL Technical Support Hotline is available from Monday to Friday, 8 AM - 6 PM (EST) +1 203 262 9990 Hotline: service@xalusa.com...