MOVE IT 1 .1 1.2 suspended MOUNTING INSTRUCTIONS WIRING DIAGRAMS NON DIM/ZIGBEE DIM LINE DIM CONTROL 0-10V XAL Inc. 150 Hawley Rd. Oxford, CT 06478 T: +1 203.262.9990 www.xalusa.com 8 / 14 M I-V02 4/13/21...
Page 3
LINE DIM CONTROL DUAL CHANNEL 0-10V DIMMING Feeder Cable to track Channel 2 Channel 1 Two 0-10V Dimmers *By others Three-Way Primary wiring configuration XAL Inc. 150 Hawley Rd. Oxford, CT 06478 T: +1 203.262.9990 www.xalusa.com 9 / 14 M I-V02 4/13/21...
Page 8
Push in and then down until it clicks in Push down 6. The connector must be inserted fully into the NODE to be properly installed XAL Inc. 150 Hawley Rd. Oxford, CT 06478 T: +1 203.262.9990 www.xalusa.com 14 / 14 M I-V02 4/13/21...
Page 9
23. LEDs are high-quality electronic components! Please avoid touching by hand the LED light emitting surface while assemblying or replacing parts and during maintenance work. 29. The LED circuit must always be closed, before the converter is connected to the main power. XAL does not assume any liability for damages resulting from nonobservance of this rule.