MOVE IT 1 .1 1.2 surface MOUNTING INSTRUCTIONS WIRING DIAGRAMS NON DIM/ZIGBEE DIM LINE DIM CONTROL 0-10V XAL Inc. 150 Hawley Rd. Oxford, CT 06478 T: +1 203.262.9990 www.xalusa.com 2 / 14 M I-V02 4/28/20...
Page 3
LINE DIM CONTROL DUAL CHANNEL 0-10V DIMMING Feeder Cable to track Channel 1 Channel 2 Two 0-10V Dimmers *By others Three-Way Primary wiring configuration XAL Inc. 150 Hawley Rd. Oxford, CT 06478 T: +1 203.262.9990 www.xalusa.com 3 / 14 M I-V02 4/28/20...
12. Slide next track onto linear 13. Use screws to secure connector(s) connector(s) screw clockwise. Repeat steps 9 - 14 for additional channels XAL Inc. 150 Hawley Rd. Oxford, CT 06478 T: +1 203.262.9990 www.xalusa.com 5 / 14 M I-V02 4/28/20...
Page 6
22 A. Snap inset(s) track(s) into track(s) Please see wiring diagram on page 2 22 B. Place magnetic 23. Installation complete inset(s) into track(s) XAL Inc. 150 Hawley Rd. Oxford, CT 06478 T: +1 203.262.9990 www.xalusa.com 6 / 14 M I-V02 4/28/20...
Page 7
23. LEDs are high-quality electronic components! Please avoid touching by hand the LED light emitting surface while assemblying or replacing parts and during maintenance work. 29. The LED circuit must always be closed, before the converter is connected to the main power. XAL does not assume any liability for damages resulting from nonobservance of this rule.