MOVE IT 1.2 RECESSED MOUNTING INSTRUCTIONS WIRING DIAGRAMS NON DIM/ZIGBEE DIM LINE DIM CONTROL 0-10V XAL Inc. 150 Hawley Rd. Oxford, CT 06478 T: +1 203.262.9990 www.xalusa.com...
Page 3
MOUNTING INSTRUCTIONS WIRING DIAGRAM LINE DIM CONTROL DUAL CHANNEL 0-10V DIMMING Feeder Cable to track Channel 1 Channel 2 Two 0-10V Dimmers *By others Three-Way Primary wiring configuration XAL Inc. 150 Hawley Rd. Oxford, CT 06478 T: +1 203.262.9990 www.xalusa.com...
MOVE IT 1.2 RECESSED MOUNTING INSTRUCTIONS WIRING DIAGRAM DALI connect grounding attach to cover (not shown) XAL Inc. 150 Hawley Rd. Oxford, CT 06478 T: +1 203.262.9990 www.xalusa.com...
Page 5
7. Use screws to secure connector 8. Turn tentioning screw counter- again clockwise 9. Insert T-Connector (optional): Use screws to attach T-connection 11. Insert X-Connector (optional): Use screws to attach X-connection XAL Inc. 150 Hawley Rd. Oxford, CT 06478 T: +1 203.262.9990 www.xalusa.com...
Page 6
60% & 95% of 150W 100' 100' the driver’s capacity. Calcu- 185W lations based atmax capacity of the driver. 240W 320W LENGTH A FEED DRIVER MOVE IT TRACK MOVE IT TRACK XAL Inc. 150 Hawley Rd. Oxford, CT 06478 T: +1 203.262.9990 www.xalusa.com...
Page 7
6. LEDs are high-quality electronic components! Please avoid touching by hand the LED light emitting surface while assemblying or replacing parts and during maintenance work. The LED circuit must always be closed, before the converter is connected to the main power. XAL does not assume any liability for damages resulting from nonobservance of this rule.