Daewoo DALMCH18-1 User Manual page 4

2. Install the chine guide
First load the chain into the guide plate, and the middle guide tooth just sticks into the guide plate
guide slot.Note: the chain blade should be forward.
NOTE: The charging chainsaw has a device to adjust the tensioning of the chain. When installing the
guide plate, make sure that the adjusting block gets stuck into the positioning adjusting hole at the
end of the guide plate!
Put the chain into the guide plate.
Note the direction of the cutting teeth.
Align the pin hole and install the reverse hole and chain.
Intall the side cover and tighten the screw nut.
3. How to adjust the tightness of the chain?
The adjustment standard is to lift the chain in the middle of the guide plate by hand and expose 1-3
middle guide teeth.
4