Register Details - Pro-face PS Series Developer's Manual

PS Series Type G Application Development Kit (ADK) Developer Manual

4.3 Register Details

RAS_IN_MASK
RAS IN MASK register
Read/Write
Register
RAS IN MASK
RMT_RST_MASK
1: External remote reset input is enabled. (Default)
0: External remote reset input is disabled.
IN1_MASK
1: DIN1 input is enabled.
0: DIN1 input is disabled. (Default)
IN0_MASK
1: DIN0 input is enabled.
0: DIN0 input is disabled. (Default)
RAS_IN_OUT
RAS IN/OUT register
Read/Write
Register
RAS IN/OUT LEDR LEDG
LEDR Front red LED control (Independent functioning of Alarm Output)
When the RAS_ALM register is 0 and the WDT_ALM_MSK register is 1 (independent of the
WDT_STT register), the control is enabled.
When the RAS_ALM register is 1 or the WDT_ALM_MSK register is 0, and the WDT_STT
register is 1 (WDT error status), the red LED is ON as priority is given to the latter status.
1: The front red LED is ON. (Default)
0: The front red LED is OFF.
3-42
B7 B6 B5
RMT_
-- -- RST_
MASK
Remote reset mask
DIN1 input mask
DIN0 input mask
B7 B6 B5
--
B4 B3 B2
-- -- --
MASK
B4 B3 B2 B1
RAS_ RAS_ RAS_
ALM OUT0 IN1
B1 B0 Note
IN1_ IN0_ 8th to 15th bits
MASK invalid "0".
B0 Note
RAS_ 8th to 15th bits
IN0 invalid "0".