Running A Program - Pro-face PS Series Developer's Manual

PS Series Type G Application Development Kit (ADK) Developer Manual
Program debugged using the PS-G unit
(1) Connect the personal computer to be used for development and the PS-G unit via
ActiveSync3.1. For details, refer to "Chapter 1 5 Remote Connection Procedure."
(2) Set the [WCE Configuration] tool bar as follows, and execute the build.
(3) When the build completes successfully, program downloading to the PS-G unit starts
automatically.
(4) After downloading is completed, the program is saved in the PS-G unit's [\My Computer]
folder. Run the program by double-clicking on the program file's icon. To debug this
program, start the PC's debugger.
Programs released for the PS-G unit
(1) Connect the personal computer to be used for development and the PS-G unit via
ActiveSync3.1. For details, refer to "Chapter 1 5 Remote Connection Procedure."
(2) Set the [WCE Configuration] tool bar as follows, and execute the build.
(3) When the build completes successfully, program downloading to the PS-G unit starts
automatically.
(4) After downloading is completed, the program is saved in the PS-G unit's [\My Computer]
folder. Run the program by double-clicking on the program file's icon.

1.3 Running a Program

The program is downloaded to the specified target device. Run the downloaded program by
double-clicking on the program file's icon. To debug this program, start the PC's debugger.
It is also possible to run a program that has been copied to a CF Card. To run a program from a
CF Card, a backup copy of the PS-G's environment settings for running applications should also
be saved on the CF-Card. Insert the CF Card into the PS-G unit and double-click
Control Panel. Then, double-click the program file's icon located in the [\My Computer\Storage
Card1] folder to run the program.
2-6
in the