Connection - Pro-face PS Series Developer's Manual

1 Development Environment
(4) Click the [PC Connection] tab, and then the button.
(5) Select the desired baud rate setting.
(6) Click the button to register and complete the [Communications Properties] settings.
(7) In the Control Panel, click on the icon to save the remote connection settings to the
CF Card. Then, reboot the PS-G unit.

5.3 Connection

If you have already connected a personal computer to the PS-G unit prior installing ActiveSync
3.1, the connection settings for the personal computer and the PS-G unit can be established by
simply double-clicking and following the procedures from step 12 in "Chapter 1 4.
Installing Application Development Tools." If the connection settings have not yet been
established, launch ActiveSync 3.1 and then select [Connection] from the [File] menu. The
personal computer will go into PS-G connection standby mode. You can then establish the
connection settings by following the procedures in "Chapter 1 4. Installing the Application
Development Tools."
1-17