During Program Development
Do not design emergency stop switches that require activation via the PS-G unit's touch panel. For
industrial machinery or equipment, installation of a physically activated mechanical-type emergency
switch is likely to be required by law. Also, for devices or equipment other than the above, be sure to
install a safety switch that complies with all relevant laws and regulations.
Handling of CD-ROM disk
Be sure to remove the CD-ROM disk before turning your personal computer's power OFF.
Do not attempt to remove the CD-ROM disc while the drive lamp is lit.
Do not touch the CD-ROM data surface.
Keep this disc away from excessively high or low temperatures, and environments with prolonged high
humidity and dust.
Do not turn OFF your personal computer's power while a program is running.
6
Usage Precautions
WARNINGS
CAUTIONS