Ras Driver; Ras Driver Apis - Pro-face PS Series Developer's Manual

PS Series Type G Application Development Kit (ADK) Developer Manual

4 RAS Driver

This driver provides RAS function control. It supports the watchdog timer, remote reset input,
standard signal inputs (two), standard signal output (one), and alarm output (one).
Each of the actions to be performed can also be designated from the control panel. This driver
provides functions equivalent to the control panel.

4.1 RAS Driver APIs

<Common functions>
Setting/display
dialog control
Common
<Watchdog timer functions>
Setting/display
dialog control
WDT Enable
Counter
Alarm
Buzzer
Reset
Popup Enable
Popup Message SetWdtMessage
3-20
API name
Retrieves information on the driver
GetRasDriverVersion
version.
RasDriverOpen Opens the RAS driver.
RasDriverClose Closes the RAS driver.
BuzzerControl Controls ON/OFF of the buzzer.
Controls ON/OFF of the
AlarmControl
ALARMOUT.
DoutControl Controls ON/OFF of the DOUT.
SetRasRegister Writes data into the RAS resister.
GetRasRegister Reads data from the RAS resister.
API name
SetWdtEnable Enables/disables the watchdog timer.
Retrieves the setting for whether the
GetWdtEnable
watchdog timer is enabled.
SetWdtCounter Sets the counter value.
GetWdtCounter Retrieves the counter value setting.
SetWdtMask Sets the alarm mask.
GetWdtMask Retrieves the alarm mask setting.
Enables/disables the buzzer
SetWdtBuzzer
activation.
Retrieves the buzzer activation
GetWdtBuzzer
setting.
SetWdtReboot Enables/disables reboot.
GetWdtReboot Retrieves the reboot setting.
Enables/disables the pop-up
SetWdtPopup
message.
Retrieves the setting for whether the
GetWdtPopup
pop-up message is enabled.
Sets the pop-up message.
Retrieves the pop-up message
GetWdtMssage
setting.
Description
RAS IN/OUT
RAS IN/OUT
Description
H/W
resister/registry
H/W
resister/registry
Registry W
Registry R
Registry W
Registry R
Registry W
Registry R
Registry W
Registry R
Registry W
Registry R
Registry W
Registry R
Registry W
Registry R