Remote Connection Procedure; Personal Computer Settings - Pro-face PS Series Developer's Manual

Type g application development kit (adk)
Table of Contents

Advertisement

5 Remote Connection Procedure

To transfer a program from the personal computer used for developing applications to the PS-G
unit and then debug the program while it is running on the PS-G unit, use ActiveSync 3.1 to
establish the connection between the personal computer and the PS-G unit.
Transfering a program via an Ethernet network greatly shortens the
transfer time. To use an Ethernet network, you should set the parameters
appropriate for the development environment.
Turn ON the power to the PS-G unit, and connect the data transfer cable (provided with the ADK)
from the COM port on the personal computer to the serial I/F (COM1) on the PS-G unit.

5.1 Personal Computer Settings

ActiveSync 3.1 - Connection Settings
Launch ActiveSync 3.1 and select [Connection Settings] from the [File] menu. In the following
screen, designate the data transfer cable port.
1 Development Environment
1-13

Advertisement

Table of Contents
loading

Table of Contents