Installing Application Development Tools - Pro-face PS Series Developer's Manual

PS Series Type G Application Development Kit (ADK) Developer Manual

4 Installing Application Development Tools

Before installing an ADK, be sure to check that the personal computer to be used for application
development meets the specified requirements by referring to the table <Required Personal
Computer Hardware> in "Chapter 1 2. Hardware Environment."
Windows 98 is not recommended if you want to both develop and debug
applications, as problems with emulation functions or remote tools may occur
during debugging. When developing applications that require performance of both
the build and the debug process, be sure to use a personal computer running
Windows NT 4.0 or Windows 2000.
To install the application development tools, follow the procedure below.
Be sure to follow the procedures given here, in sequence. If you do not, the tools may not operate
correctly.
(1) Install the eMbedded Visual Tools.
(2) Install the ADK for eMbedded Visual C++ or eMbedded Visual.
(3) Install ActiveSync 3.1.
Installing the eMbedded Visual Tools
(1) Install the eMbedded Visual Tools software.
eMbedded Visual Tools contains both eMbedded Visual C++ and eMbedded Visual Basic.
Install either or both, depending on your needs.
Installing the ADK
(1) Insert the ADK CD-ROM into your personal computer's CD-ROM drive and install either the
ADK for eMbedded Visual C++ or eMbedded Visual Basic.
• To install ADK for Visual C++
Install ADK for Visual C++ by double-clicking on the [psgsdk.exe] file located in the CD-
ROM's [\us\psg-adk\vc] folder. After the installation screen appears, follow each screen's
instructions.
• To install ADK for Visual Basic
Install ADK for Visual Basic by double-clicking on the [psgsdk.exe] file located in the CD-
ROM's [\us\psg-adk\vb] folder. After the installation screen appears, follow each screen's
instructions.
1-8
CAUTION