Table of Contents
Advertisement
8. Insert the configured modules in the project structure of the IO controller in the desired slot position
on the JUMO IO device. Click "Add Device" to integrate the input/output mapping of the PROFINET
device into the IO controller.
NOTE!
The JUMO IO device uses the little endian format – please note this when configuring the IO controller
and set it if required. Otherwise the transferred data will not be interpreted correctly!
For project configuration in the engineering system of your PROFINET IO controller, you can popu-
late all slots on your JUMO IO device with modules. You can use the engineering system to create
the modules for various data types in the field device concerned and configure their contents to suit
your needs. An overview of the module types can be found in the "Module description" chapter.
chapter 4.2 "Module description", Page 11
The contents of the configurable modules can be determined by the user. In the engineering system,
the modules must be assigned to the free slots in the JUMO IO device, so that they can be queried
by the IO controller during the cyclical communication.
In the project structure of the IO controller, the modules then have to be assigned to the free slots in
line with the configuration of the JUMO IO device.
5 Project planning
31
Advertisement
Table of Contents
