Configuration In Codesys® (Using The Setup Program) - JUMO variTRON 500 Manual

5 Project planning
The configured IP address is displayed there if there is an active LAN connection.
5.2.2 Configuration in CODESYS® (using the setup program)
NOTE!
CODESYS® SP17.3 and the setup program (JUMO smartWARE Setup variTRON) must have been in-
stalled on the PC being used. The setup program is provided on the supplied DVD or alternatively you
can download it from the JUMO website.
NOTE!
This document does not cover how to start the setup program, create a project in the setup program, or
start the CODESYS PLC programming system.
These topics are covered in the operating manual for the JUMO variTRON 500 (705002). The operating
manual can be downloaded from the relevant product page (705002) on the JUMO website (see chapter
2.1).
Process:
1. Install PROFINET device (JUMO variTRON 500) (install GSDML file).
NOTE!
The GSDML file for the current device version is located on the DVD from the scope of delivery of your
JUMO field device. Alternatively, you can download the GSDML file from the JUMO website.
18