Table of Contents
Advertisement
5 Project planning
10. Load the application into the JUMO variTRON 500.
11. Click RUN to start the application.
The PROFINET device is now ready for the IO controller to assign the device name and IP address.
NOTE!
This document does not cover how the configuration that was created in CODESYS® is applied to the
setup project or transferred to the device (IO device).
These topics are covered in the operating manual for the JUMO variTRON 500 (705002). The operating
manual can be downloaded from the relevant product page (705002) on the JUMO website (see chapter
2.1).
5.2.3
Device information
The device info for the JUMO IO device displays, for inspection and error diagnostics, information about
network configuration, hardware and software component versions, as well as counters for evaluating
data traffic. For more details about the displayed data, see the operating manual for your JUMO IO de-
vice.
25
Advertisement
Table of Contents
