Assumptions And Advisory Notes; Figure 2. Ek-Ra4E2 Board Bottom Side - Renesas RA4 Series User Manual

Renesas RA Family
2
I C Pull-up
Disconnects
Pmod 2
Configuration
Debug MCU Power
Select
JTAG GND Detect
Disconnect
RA MCU SWD
Disconnect
Debug MCU Reset
RA MCU SWD
Disconnect
Breakout Pin
Header J3
Breakout Pin
Header J2

1.1 Assumptions and Advisory Notes

1. It is assumed that the user has a basic understanding of microcontrollers and embedded systems
hardware.
2. It is recommended that the user refers to the EK-RA4E2 Quick Start Guide to get acquainted with the kit
and the Quick Start example project that EK-RA4E2 board comes pre-programmed with.
3. Flexible Software Package (FSP) and Integrated Development Environment (IDE) such as e
required to develop embedded applications on EK-RA4E2 kit.
4. Instructions to download and install software, import example projects, build them and program the
EK-RA4E2 board are provided in the quick start guide.
5. The MCU fitted to the EK board may not contain the latest version of the on-chip boot firmware.
R20UT5175EG0300 Rev. 3.00
Feb.27.23

Figure 2. EK-RA4E2 Board Bottom Side

EK-RA4E2 v1 – User's Manual
Grove 2
Configuration
Pmod 1
Configuration
User Button
Disconnects
User LED
Disconnects
Reference Voltage
Source Select
Breakout Pin
Header J1
RA MCU
Clock Configuration
2
studio are
Page 6 of 30