Axial And Radial Forces - Siemens SIMOTICS XP 1MB5 Operating Instructions Manual

5.3.9

Axial and radial forces

You can obtain the permissible values for axial and radial forces by contacting the Service Center
(Page 12) or referring to the machine catalog.
Damage to bearings or the shaft
Large output masses and their centers of gravity outside the shaft extensions can lead to
resonance in operation. This can result in damage to the bearings and shaft. In an explosive
atmosphere, there is a risk of explosion. Death, serious injury, or material damage can result.
• Ensure that the permissible loads for the forces on the shaft extension are adhered to in
1MB5 shaft height 400/450
Operating Instructions, 04/2023, A5E52802354A
WARNING
accordance with the catalog data or configuration data.
5.3 Lift the machine to where it will be mounted and position it
Assembly
63