Route The Cable With An Appropriate Loop So That Water Can Drip Off; Terminal Box - Siemens SIMOTICS XP 1MB5 Operating Instructions Manual

Table 6-1

Terminal box

TB3R61
1XB1631
1XB7750
6.3 Route the cable with an appropriate loop so that water can drip
off
• In case of high humidity or when installed outside, water drops can move along the cable
jacket and enter the motor through the cable entry and cable gland.
If you route the cable with an appropriate loop then water doesn't enter the terminal box, but
simply drips off.
Figure 6-1
6.4 Terminal box
Depending on the version, different terminal boxes may be installed on the machine. Depending
on the terminal box, different cable entries and options for the cable connection are possible.
You can identify the terminal box installed on the machine based on the graphics in the
following chapters.
1MB5 shaft height 400/450
Operating Instructions, 04/2023, A5E52802354A
Connection technology (with cable lug / connection without cable lug)
With cable lug (Page 83)
Water drip loop
Connection
Without cable lug (Page 85)
Electrical connection
6.4 Terminal box
71