Terminal Box - Siemens 1PH813 Operating Instructions Manual

6.2.4

Terminal box

● Assign the terminals in the terminal box as shown in the diagrams "Terminal box: 3-pole"
● Connect the protective conductor.
● Use cable lugs to DIN 46234.
● Do not remove the insulation strips.
● Screw the lid of the terminal box back on (tightening torque: 5 Nm).
1
2
3
Figure 6-2
1
2
3
Figure 6-3
Synchronous/induction motors 1PH813
Operating Instructions, 04/2009, 610.48000.22
and "Terminal box: 6-pole".
Terminal screw M6
Grounding screw M6
Insulation strips
Terminal box gk833, 3-pole
Terminal screw M6
Grounding screw M6
Insulation strips
Terminal box gk843
Connection
6.2 Electrical connection
41