Important Safety Precautions - TE Connectivity 2155369 Instruction Manual

1. Use the battery and the charger designed for the tool

 Use the battery designed for the tool
Do not charge the battery with the charger other than recommended in this instruction manual

Ensure that batteries are charged using the correct charger recommended in this instruction
manual. Incorrect use may result in a risk of electric shock, overheating or leakage of corrosive
liquid from the battery.
2. Charge the battery correctly

Use within the rated voltage for this unit

Use under AC power supply from a wall outlet. It can not be used with the portable generator or
DC power supply. Incorrect use may cause overheating of the battery or a fire.

 Charge batteries at an ambient temperature of 10°C to 40°C.
Charge the battery in a well ventilated area.
Do not cover the charger or battery with a cloth on charge.
It may cause explosion of the battery or a fire.

Unplug the charger from the outlet to prevent a risk of electric shock or fire when not in use.
3. Do not short circuit the contacts of the battery

Attach a terminal cover if store a spare battery pack.

Short circuit in a flammable bag may cause explosion of the battery or a fire
4. Do not throw the battery pack in a fire

It may cause explosion of the battery or leakage of hazardous chemical substances.
5. In any of the following cases, retract the ram completely and remove the battery

Not in use or need repair

Changing dies or other attachments

A potentially hazardous condition
Activation of the tool may cause personal injury if the battery is attached.
6. Never operate the tool while the head is pointing in the direction of bystanders

The head may break and fly out
7. The use of any accessory or attachment is recommended

The use of any accessory or attachment, other than recommended in this instruction manual, may
present a risk of personal injury.
8. Warning for electric shock

Tools are NOT insulated for use on or near energized conductors. Use of these tools near
energized conductors may lead to electrical shock, causing severe injury or death. Do NOT use
these tools near energized conductors without adequately insulating operator and surroundings

Do not touch the AC plug or the battery pack with moistened hands. It may cause an electric
shock.
9. Prevent the risk of unintentional starting

Do not carry the tool with a finger on the trigger. Activation of the tool may cause personal injury.
10. Use safety glasses

Use safety glasses and if the operation is dusty, a face or dust mask
11. Work environment

Do not expose the tool to rain. Do not use the tool in damp or wet locatio ns.
It may cause an electric shock or fumes from the tool.

 Work in a well lighted area. Dark work environment may cause personal injury.
Do not use tools charge the battery in the presence of flammable liquids or gases.
It may cause explosion of the batter or a fire.
Rev B3
Customer Manual
取扱 明書

Important Safety Precautions

409-78005
3 of 26