Temp Compensation / Shake Feature / Counters - MTI AUTOFRY -40C Operator's Manual

Temperature Compensation (Comp):
This feature compensates for the drop in oil temperature when
food is cooking. It automatically adjusts the cook time so your
product comes out perfect every time.
Shake Feature:
This feature shakes the basket every :15 or :30 seconds during a
cook cycle for less sticking and a higher quality cooked product.
To exit the programming mode:
•
Press the POWER key from any level until the display is turned off.
Using the presets:
•
Press and hold for 1 second the button (1-9) that corresponds to
the desired preset.
•
The display will show the name of the preset.
•
Place the selected food product into the food entry chute, close
the chute and press START.
•
The display will count down from the preset time.
OR
•
Use the ARROW keys to scroll through the presets to the desired preset.
•
The display will show the name of the preset.
•
Place the selected food product into the food entry chute, close the chute and press START.
•
The display will count down from the preset time.
Counters:
The counters allow you to view how many cook cycles have been
entered for each preset and the manual cycle. This feature can be
useful for inventory control.
Access the count feature from the System Programming screen by
pressing 2.
To reset the count press CLEAR. All Cycles and All Hours cannot be
cleared.
To exit the count screen press POWER until the display turns off.
MTI-40C OM 04/17 Rev C
AutoFry
MTI-40C Operator's Manual
16
63-0008C