4.1 INTRODUCTION
This chapter's information is pertains to using the MPB in an MEVB (the MPB
installed on a MPFB). Signals on the MPFB logic analyzer connectors are defined
by the MPB type.
4.2 LOGIC ANALYZER CONNECTOR SIGNALS
The tables of this chapter describe MPFB logic analyzer connector signals if you
install an M68MPB16Z1 on the MPFB. The signal descriptions on J12 – J20 are
the logic analyzer pin-outs on the plastic overlay supplied with the MPB.
The signal descriptions in the following tables are for quick reference
only. The MC68HC16Z1 User's Manual, MC68HC16Z1UM/AD,
contains a complete description of the MC68HC16Z1 MCU signals.
M68MPB16Z1UM/D
CHAPTER 4
MEVB SUPPORT INFORMATION
MEVB SUPPORT INFORMATION
NOTE
4-1