Related Manuals for No Butts Bin SR8065
Summary of Contents for No Butts Bin SR8065
- Page 1 Assembly Instructions Shelter type: SR8065 Email : Sales@nobutts.com SR8065-01-03112021-USA Web : www.nobutts.com Tel : 1-888-662-8887...
- Page 2 Exploded View Tools required: Drill/Screwdriver Wrench Mallet Torx bit...
-
Page 3: Parts List
PARTS LIST ITEM IMAGE PART NAME DRG NUMBER Size (inch) QTY. 78.74 x 40.74 S1 Frame 4.3 x 4.3 x 1.57 CB1 Bracket 4.33 x 1.57 JF1 Bracket 1.57 x 1.57 x 3.94 FT1 Bracket 1.57 x 3.15 x 4.17 FT3 Bracket 4.3 x 1.6 x 2 DR Bracket... - Page 4 FIXINGS Fittings Bolt set M10 BTANCM12100 1.5" M10/12 x 100 mm 1" Tech Black M10 x 60mm Washer Tech screw Caps Concrete Bolt screw Pack A+B Image...
- Page 5 Step 1 Assemble S1 frames to make up the main structure using CB1 brackets for the Corners and JF1 brackets for the straight joints. Please note 1.5" Tec Screws are for roof panels only MEASURE THE WIDTH AND DEPTH OF THE SHELTER TO CHECK CORRECT ALIGNMENT.
- Page 6 Step 2 Use JF1 and CB1 brackets to attach the P1 post and ST3 Tie bar.
- Page 7 Step 3 Attach AR2R rafters using DR brackets. Secure the AR2IS end panels to S1 frames using tec screws. The end rafters need to be placed in position at the same time as the AR2IS end panels. Stick sealing strips to each rafter. AR2R AR2R AR2R...
- Page 8 Step 4 Attach the AR2CLTO and AR2CLTI to the top of the rafters The AR2CLTO are to be lined up near the end panels and the AR2CLTI have to be spaced equally along the centre. The ARFSO and ARFSI parts are to be attached to the lower part of the rafters as shown below.
- Page 9 Step 5 Attach the AR2POA roof panels on the outer edges of the shelter nearest to the end panels and the AR2PIA pannels need to be equaly spaced along the centre. Cap off the top using AR2CUTO and AR2CUTI as shown below. use the AR2TS strips to cover the gaps between the panels.
- Page 10 PLAN VIEW OVERALL DIMENSIONS AND GROUND FIXING POSITIONS Suggested size for concrete base: 200mm oversized on all 4 sides. 83.07...
-
Page 11: Maintenance
Ensure all fittings are tight (for example after a big storm) • Touch up any exposed metal should it get scratched CONTACT DETAILS: No Butts Bin Company, Inc. 16 Birch Lane, Madison, CT 06443 Email : Sales@nobutts.com Web : www.nobutts.com...