Related Manuals for No Butts Bin SR1551
Summary of Contents for No Butts Bin SR1551
- Page 1 Assembly Instructions SR1551 Product Code: Email : Sales@nobutts.com Doc. No.: SR1551-04-130219-USA Web : www.nobutts.com Tel : 1-888-662-8887...
-
Page 2: Exploded View
Exploded View... - Page 3 PARTS LIST ITEM NO. PART NO. DESCRIPTION DIMENSION (mm) DIMENSION (Inch) IMAGE QTY. FRAME 2000x1035 78.74x40.75 BRACKET 220x40 7.87x1.58 BRACKET 110x110 4.33x4.33 ROOF TIE 1025x40x40 40.35x1.58x1.58 FOOT 109X100X40 4.29x3.94x1.58 FOOT 109X100X80 4.29x3.94x3.15 BRACKET 110x46 4.33x1.81 RAFTER 1130x40x40 44.49x1.58x1.58 SEALING STRIP TRIM TO 1135 TRIM TO 44.69 1 ROLL...
- Page 4 Fittings and Tools Fittings Bolt set M10 T25 T38 BTANCM12100 25 mm 38 mm Washer Black M10/12 x 100 mm M10 x 60 mm Tech Tech Caps Concrete Bolt screw screw Pack A Required Image Tools required: NOTE: THE 38mm TECH SCREWS ARE FOR FIXING ROOF STRIPS (RC1) ONLY Drill/Screwdriver...
- Page 5 Step 1 Assemble the back and side frames using the S1 frames. Join the frames using the CB1 brackets in the corners and the JF1 brackets on the flat joints. BLUE DIMENSIONS - MM S1 Frame GREEN DIMENSIONS - INCH JF 1 Check the dimension of the shelter to ensure...
- Page 6 Step 2 Insert EC40 end caps into both ends of the ST1 tie bar. Attach front S1 frame and ST1 tie bar using CB1 brackets in the corners and JF1 brackets on the straight joint. Once the main structure is secured, move the shelter into its final position and install foot brackets FT1 and FT3 to fix shelter to the ground.
- Page 7 Step 3 Screw RB1 brackets to the top of the frames, then Bolt R1 roof rafters to RB1 brackets. Rafters are 1035mm to centers (this should coincide with the next frame see Detail E below). R1 RAFTER DETAIL C SCALE 1 : 5 40.75 40.75 1035...
- Page 8 Step 4 Stick sealing strips (SS)on top of the rafters and align roof panels (PCE1). Apply more sealing strips to the top of the roof panel directly above the first sealing strips. Fix the RC1 strips on the edges and over the gap between the roof panels and screw in with 38mm Tech screws.
-
Page 9: Plan View
Plan View Suggested size for concrete base: 200mm OR 7.87inches oversized on all 4 sides. 44.85 1139.25 39.17 1044.50 41.12... - Page 10 NOTES:...
- Page 11 NOTES:...
-
Page 12: Maintenance
Touch up any exposed metal should it get scratched CONTACT DETAILS: Email : Sales@nobutts.com Web : www.nobutts.com Tel : 1-888-662-8887 No Butts Bin Company, Inc. 16 Birch Lane, Madison, CT 06443 All Parts and Fixings checked by: Print Name: Signature:...