Download Print this page

Advertisement

Quick Links

Assembly Instructions
Product code: SR7896
Doc. No.: SR7896-01-191021-USA

Advertisement

loading

Summary of Contents for No Butts Bin SR7896

  • Page 1 Assembly Instructions Product code: SR7896 Doc. No.: SR7896-01-191021-USA...
  • Page 2 EXPLODED VIEW AND TOOLS 15 4X 13 4X 8 16X 12 5X 13 4X 10 2X 11 2X 1 8X 8 16X 9 5X 10 2X 3 9X 1 8X 3 9X 2 8X 4 1X 6 2X Tools required: Wrench Drill/Screwdriver Torx bit...
  • Page 3 PARTS LIST AND FITTINGS PART ITEM Size (inch) IMAGE DESCRIPTION QTY. 78.74 x 40.74 Full Frame Corner Bracket - 4.3 x 4.3 x 1.57 4.33 x 1.57 Joint Flat - JF1 81.1 Roof Tie - ST3 40x40 PLASTIC EC40 1.57 x 1.57 END CAP 1.57 x 1.57 x 3.94 FT1 BRACKET...
  • Page 4 Step 1 Assemble S1 frames to make up the main structure using CB1 brackets for the corners and JF1 brackets for straight joints. Also use CB1 and JF1 brackets to secure the ST3 tie bar. NOTE: Insert EC40 into ST3 before installation. Check overall dimensions to ensure correct alignment JF1 ON INNER...
  • Page 5 Step 2 Attach the DR1R rafters using the DR brackets and 1 inch tech screws. The Infill panels (DR1I) are also attached using 1 inch tech screws but must be placed into positioned at the same time as the end rafters. DR1R DR1R DR1I...
  • Page 6 Step 3 Arrange the roof panels by lining up the end panels(DR1PO) flush with the outer rafters and equally space the middle pieces(DR1PI) between the outers. Seal the gaps between the panels and the outer edges with the DR1T strips. Then cap the bottom of the rafters using the DRATO and DRATI angles.
  • Page 7 Step 4 Move the shelter into its final position and attach the floor brackets. FT1 brackets are used where there is only a single leg and FT3 brackets used where there are two legs next to each other.
  • Page 8 GROUND ANCHOR POSITIONS AND OVERALL SIZE SUGESTED SIZE FOR BASE: 8Inch OVERSIZES ON ALL 4 SIDES Scale 1:20 44.71 39.17 41.12...
  • Page 9: Maintenance

    Ensure all fitting are tight (for example after a big storm) • Touch up any exposed metal should it get scratched CONTACT DETAILS: No Butts Bin Company, Inc. 16 Birch Lane, Madison, CT 06443 Email: Sales@nobutts.com Web: www.nobutts.com Tel: 1-888-662-8887...