Manual Program Operations; Single Program Operation; Multiple Program Operation - Toro TMC-424E User Manual

TMC424_UGE_466A 1/22/08

Manual Program Operations

This type of manual watering is also known as "Semi-automatic" operation.
When a program is started manually, it runs through the watering cycle as if
started automatically. A single program can be operated, or multiple programs
can be run in sequence or simultaneously.
NOTE: All automatic program control options selected within Special Functions
will also apply to all manual operations.

• Single Program Operation

1. Turn the Function Dial to Manual Program
2. Set the Program Switch to select program A, B, C, or D. The program letter
and MAN will be displayed. All stations assigned to the program will be
indicated by solid circles.
3. Press the
will turn on. The program identifier and
4. Turn the Function Dial to RUN
• The operating station number, remaining station run time and the
(flashing) will begin alternating with the current time of day.
• The stations will operate one at a time in numeric sequence.
• Automatic mode will resume when the manual operation is finished.
• To turn off an active station and start the next station in sequence, press
t h e button.
• To end manual operation at any time, turn the Function Dial to O F F
f o r the display to stop flashing, then turn the dial to R U N

• Multiple Program Operation

1. Turn the Function Dial to Manual Program
2. Set the Program Switch to select program A, B, C, or D.
3. Press the
and icon will begin flashing.
4. To select additional programs, repeat steps 2 and 3.
5. Turn the Function Dial to R U N
• The operating program identifier, station number(s), remaining station run
time and
• The programs will operate in the order selected, either sequentially or
concurrently as determined by the Stack/Overlap option selection.
• Automatic mode will resume when the manual operation is finished.
• To turn off an active station and start the next station in sequence, position the
Program Switch (if needed) to select the program, then press t h e
• To end manual operation at any time, turn the Function Dial to O F F
When the display stops flashing, turn the dial to R U N
5:00 PM Page 15
button to start the watering cycle. The first station in sequence
button to start (or queue) the program. The program identifier
.
icon will begin alternating with the current time of day.
.
icon will begin flashing.
.
.
icon
, w a i t
.
button.
.
.
15