Erase Program Memory; Selecting Handheld Remote Operation; Selecting Display Language Option; 12/24-Hour Time Display Option - Toro TMC-424E User Manual

TMC424_UGE_466A 1/22/08

Erase Program Memory

Erasing the program memory will remove all user-defined information including
run times, start times and day schedule from a specified program. Additionally,
all control options specified for the program will be reset to factory defaults.
1. Set the Program Switch to select program A, B, C, or D.
2. Turn the Function Dial to Special Functions
3. Press the
4 . Press the
the button again to display D O N E.

Selecting Handheld Remote Operation

The TMC-424E is equipped for use with the Toro TMR-1 handheld remote.
By default, remote control operation is enabled. To disable operation with TMR-1
receiver, using the following procedure.
1. Turn the Function Dial to Special Functions
2. Press the
3. Press the

Selecting Display Language Option

The TMC-424E displays word prompts in English (ENG) by default and offers
five additional languages preferences as follows: Spanish (ESP), French (FRA),
Italian (ITA), German (DEU) and Portuguese (POR).
1. Turn the Function Dial to Special Functions
2. Press the
3. Press the
Selecting 12/24-hour Time Display Option
This feature enables the clock time display to be changed from 12-hour (am./p.m.)
format to a 24-hour clock format.
1. Turn the Function Dial to Special Functions
2. Press the
3. Press the

Selecting Run Time Format

This feature enables the station run time to be selected in seconds increments
in addition to minutes and hours increments.
1. Turn the Function Dial to Special Functions
2. Press the
3. Press the
5:00 PM Page 13
button as needed to display ERASE.
button once to display O K ? To initiate the erase function, press
button as needed to display HH – Y (Hand Held – Yes)
or buttons to select HH – N (Hand Held – No).
button as needed to display ENG (or the current language).
or buttons to select the desired language.
button as needed to display 12H.
or buttons to select 24H.
button as needed to display SEC – N (Seconds – No).
or buttons to select SEC – Y (Seconds – Yes).
.
.
.
.
.
13