Home Decorators Collection RYLAND AK433A-MBK Use And Care Manual page 8

Assembly — Hanging the Fan
4
Attaching the mounting bracket to the
electrical box
WARNING: To reduce the risk of re, electric shock or other
personal injury, mount the fan only to an outlet box or supporting
system marked acceptable for fan support and use the mounting
screws provided with the outlet box.
Pass the 120-volt supply wires through the center hole in
the mounting bracket (A).
Attach the mounting bracket (A) on the outlet box by sliding
the mounting bracket (A) over the screws provided with the
outlet box. Note that the at side of the mounting bracket
(A) is toward the outlet box.
Securely tighten the two mounting screws.
Assembly — Attaching the Fan Blades
5
Attaching the fan blades
WARNING: To reduce the risk of personal injury, do not
bend the blades (G) while installing, balancing the blades (G)
or cleaning the fan. or cleaning the fan.
WARNING: Do not insert foreign objects between rotating
fan blades (G).
Align the holes from the blade (G) to the holes from the
motor (F), and secure the blade in place with blade support
plate with blade attachment screws and lock washers (H)
provided.
Repeat this procedure with the remaining blades (G).
H
8
Outlet Box
A
F
G